BODY FILLER 1100

Hazard statements (CLP)

H226, H315, H319, H361d, H372

Code

Statements

H226

Flammable liquid and vapour

2.1 Classification of the substance or mixture

The mixture was classified as dangerous pursuant to current regulations - see section 15. 1272/2008/WE Reproductive toxicity, Hazard Category 2 (Repr.2) Suspected of damaging the unborn child. Irritating effect on skin, category 2 (Skin Irrit.2). Causes skin irritation. Serious eye damage/eye irritation, Hazard Category 2 (Eye Irrit.2). Causes serious eye irritation. Specific target organ toxicity — Repeated exposure, Hazard Category 1 (STOT Rep. 1) Cause damage to organs through prolonged or repeated exposure. Liquid, flammable substances, category 3 (Flam. Liq. 3). Flammable liquid and vapour.

Contains

styrene

Signal word

Danger H226 Flammable liquid and vapour. H361d Suspected of damaging the unborn child. H315 Causes skin irritation. H319 Causes serious eye irritation. H372 Cause damage to organs through prolonged or repeated exposure. P102 Keep out of reach of children. P201 Obtain special instructions before use. P202 Do not handle until all safety precautions have been read and understood. P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P235 Keep cool. P241 Use ventilating equipment. P243 Take precautionary measures against static discharge. P260 Do not breathe dust, vapours. P270 Do no eat, drink or smoke when using this product. P280 Wear protective gloves, protective clothing, eye protection,face protection. P362 Take off contaminated clothing and wash before reuse. P303 + P361 + P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water. P333 + P313 If skin irritation or rash occurs: Get medical advice.

2.2 Label elements

P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337 + P313 If eye irritation persists: Get medical advice. P308+P313 IF exposed or concerned: Get medical advice. P370+P378 In case of fire: Use dry chemical powder for extinction. P403 + P233 Store in a well-ventilated place. Keep container tightly closed. P405 Store locked up. P501 Dispose of contents, container in accordane with local, state and federal regulations.

2.3 Other hazards

Styrene fumes form explosive mixtures with air. Fumes are heavier than air and accumulate close to the ground level and in lower parts of rooms. Styrene polymerization may occur under the influence of high temperature or as a result of contact with strongly oxidizing agents, peroxides, strong acids, bases, metal salts, copper and its alloys. Styrene polymerization is a highly exothermic process.