Diamond cutter for dental use

Hazard statements (CLP)

H317, H332, H400, H411

Code

Statements

H317

May cause an allergic skin reaction

SECTION 2: Hazards identification

Regulation (EC) No. 1272/2008 [CLP] Classification of the substance or mixture The diamond cutter, when handled and stored for the use to whichit is intended, is not dangerous. The product is classified as non-

R-phrase(s)

20-21-22 The full text of the risk phrases (R) and danger indications (H) is given in Section 16 of the card 2.2. Elements of the label.

Hazard pictograms

Warnings: danger Danger indications: They refer to nickel during production and not to finished milling H317 Toxic if ingested and in contact with the skin H332 Harmful if inhaled Toxic to aquatic organisms H411 h

Precautionary statements

They refer to Nickel in the production phases and not to the finished cutter P302+P352 IN CASE OF CONTACT WITH THE SKIN: wash thoroughly with soap and water. P312 In case of malaise contact a doctor. P273 Do not disperse in the environment 2.3. Other dangers. PBT or vPvB not required because the substances (stainless steel, diamond, nickel,gold) are inorganic

2.1 Classification of the substance or mixture

The diamond cutter, when handled and stored for the use to whichit is intended, is not dangerous. The product is classified as non- dangerous because it is inert under the provisions of Directives 67/548/EEC and 1999/45/EC and/or Regulation (EC) No 1272/2008 (CLP) (and subsequent amendments andadjustments). In the processing, grinding, galvanic and packaging phases there are no dangers for operators in accordance with DPR N.59/2013 with the AUA Regulation (water discharges) and Law 81/2008 on the health and safety of operators. To minimize any risk of allergies due to the presence of Nickel during the processing phase,operators usegloves. Component migration test . A nickel migration test has been carried out from the diamond cutter and the data are extremelylow at 0.00000 mg/dm2 insignificant for the purposes of any allergies Any additional information regarding health and/or environmental risks can be found in Sections 11 and 12 of this fact sheet. 2.1.1. Regulation 1272/2008 (CLP) and subsequent amendments and adjustments. Classification and indications of danger: Acute Tox. 4, Acute Tox 2 H317, H332 , H400, H411 2.1.2. Directives 67/548/EEC and 1999/45/EC and subsequent amendments and adjustments. Danger symbols: For the presence of Nickel Salts during the processing phases (galvanic) R-phrases: 20-21-22 The full text of the risk phrases (R) and danger indications (H) is given in Section 16 of the card. 2.2. Elements of the label. Hazard labelling under Regulation (EC) No 1272/2008 (CLP) and subsequent amendments and adjustments. Hazard pictograms: Warnings: danger Danger indications: They refer to nickel during production and not to finished milling H317 Toxic if ingested and in contact with the skin H332 Harmful if inhaled Toxic to aquatic organisms