Isobutylene 0.0001% to 7.79% in Nitrogen

NorLab a division of Norco

Revision date : 2017-11-08

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS04
Health risk rating 2
Safety risk rating 1
Environmental risk rating 1

Note: Ingredients listed on restricted chemical lists

EC/CAS

115-11-7

Name of the chemical

isobutene

Concentration

7.79%

EC/CAS

7727-37-9

Name of the chemical

Nitrogen N2

Concentration

92.21-

General Information

Revision date

2017-11-08

Product name

Isobutylene 0.0001% to 7.79% in Nitrogen

Product Synonyms

Isobutylene in Nitrogen; Isobutylene in Nitrogen Calibration Gas Mix

Chemical name

Gas Mixture

1.2.1 Relevant identified uses

Calibration of Analytical Instrumentation

supplier name

NorLab a division of Norco

Icons in SDS

GHS04 M004 M009 T018

Company Information

company name

NorLab a division of Norco

GHS Information

Signal word

WARNING

Section 2

SECTION 2: Hazards identification

Classification of Substance

Signal word

WARNING

Hazard statements

H280 - Contains gas under pressure; may explode if heated OSHA-H01 - MAY DISPLACE OXYGEN AND CAUSE RAPID SUFFOCATION

Precautionary statements

P202 - Do not handle until all safety precautions have been read and understood. P261 - Avoid breathing dust/fume/gas/mist/vapours/spray. P281 - Use personal protective equipment as required. P304 + P340 - IF INHALED: Remove person to fresh air and keep comfortable for breathing. P271 - Use only outdoors or in a well-ventilated area. CGA-PG02 - Protect from sunlight when ambient temperature exceeds 52 °C (125 °F). CGA-PG05 - Use a back flow preventive device in the piping. CGA-PG06 - Close valve after each use and when empty. CGA-PG10 - Use only with equipment rated for cylinder pressure.

Principle Routes of Exposure

Inhalation Eyes; Inhalation; Skin; Product is a simple asphyxiant. This product may displace oxygen if released in a confined space. Maintain oxygen levels above 19.5% at sea level to prevent asphyxiation. Effects of oxygen deficiency resulting from simple asphyxiants may include: rapid breathing, diminished mental alertness, impaired muscular coordination, faulty judgment, depression of all sensations, emotional instability and fatigue. As asphyxiation progresses, nausea, vomiting, prostration and loss of consciousness may result, eventually leading to convulsions, coma and death. Oxygen deficiency during pregnancy has produced developmental abnormalities in humans and experimental animals. Skin Contact Contact with rapidly expanding gas near the point of release may cause frostbite with redness, skin color change to gray or white, and blistering. Eye Contact None anticipated. Contact with rapidly expanding gas near the point of release may cause frostbite. Ingestion Not anticipated. Product is a gas at normal conditions.

2.1 Classification of the substance or mixture

GHS Classification in Accordance with 29 CFR 1910 (OSHA HCS)

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.