AS-NCS001 CONDUCTIVE SILICONE CAULK

SECTION 2: Hazards identification

Potential health effects

Ingestion Low order of toxicity Skin Contact Prolonged or frequent contact may result in skin sensitization, irritation and dermatitis Eye Contact Causes eye irritation – see note below in section 11 concerning contact lenses Inhalation No hazard if used as directed – if the cured material is ground or abraded it is recommended that appropriate respiratory protection is used 3. Material Composition - Chemical Name CAS-No. EC EINECS No. Symbol %(W/W) R-phrases R36 R37 R38 Nickel (Ni) 7440-02-0 231-111-4 Xn >50 R40 R42 R43 Graphite 7782-42-5 231-955-3 - >25 Amorphous silica 7631-86-9 231-545-4 - <5 R20 (SiO2) R10 R20 R22 Xylene 1330-20-7 215-535-7 Xn <5 R36 R37 R38 Note: This material is a homogenous polymer mixture and both the nickel metal and silica constituents are fully encapsulated within the polymer. This greatly reduces any harmful effect that might otherwise have as free powders e.g. there is virtually no inhalation risk unless the material is abraded or thermally decomposes Chip classification risk (R) phrases R10 Flammable R20 Harmful by inhalation R22 Harmful if swallowed R36 Irritating to eyes R37 Irritating to respiratory system R38 Irritating to the skin R40 Limited evidence of a carcinogenic effect R42 May cause sensitisation by inhalation R43 May cause sensitisation by skin contact