P Series Powder Coatings

Hazard statements (CLP)

H303, H313, H315, H333, H336

Code

Statements

H303

May be harmful if swallowed

SECTION 2: Hazards identification

Principle Routes of Exposure

Inhalation, Ingestion, Skin Absorption, Eye Contact Target Organs: Respiratory System, Pulmonary System, Reproductive System Inhalation: May cause irritation of the respiratory tract. Prolonged or repeated exposure causes lung damage. Skin Contact: May cause skin irritation. May cause skin irritation. Eye Contact: Dust may cause irritation and inflammation. Ingestion: Harmful if swallowed. NFPA: Health = 2, Fire = 1, Reactivity = 0 HMIS III: H*2/F1/PH0 2 1 2 0 F | Safety Glasses, Gloves, Apron, Dust Respirator Page 2 of 10

Signal word

WARNING GHS Hazard Pictograms GHS Classifications Health, Acute toxicity, 5 Oral Health, Acute toxicity, 5 Inhalation Health, Specific target organ toxicity - Single exposure, 3 Health, Acute toxicity, 5 Dermal Health, Skin corrosion/irritation, 2 GHS Phrases H303 - May be harmful if swallowed H333 - May be harmful if inhaled H336 - May cause drowsiness or dizziness H313 - May be harmful in contact with skin H315 - Causes skin irritation

Precautionary statements

P101 - If medical advice is needed, have product container or label at hand. P102 - Keep out of reach of children. P103 - Read label before use. P202 - Do not handle until all safety precautions have been read and understood. P210 - Keep away from heat/sparks/open flames/hot surfaces. No smoking P211 - Do not spray on an open flame or other igntion source. P221 - Take any precaution to avoid mixing with combustibles. P232 - Protect from moisture. P233 - Keep container tightly closed. P234 - Keep only in original container. P235+410 - Keep cool. Protect from sunlight. P242 - Use only non-sparking tools. P250 - Do not subject to grinding/shock/friction. P262 - Do not get in eyes, on skin, or on clothing. P270 - Do not eat, drink or smoke when using this product. P280 - Wear protective gloves/protective clothing/eye protection/face protection. P284 - Wear respiratory protection. P302+350 - IF ON SKIN: Gently wash with soap and water. P304+340 - IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. P308+313 - IF exposed or concerned: Get medical advice/attention. P330 - Rinse mouth. P331 - Do NOT induce vomiting. P335 - Brush off loose particles from skin. P341 - If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing. P373 - DO NOT fight fire when fire reaches explosives. P403 - Store in a well ventilated place. P410 - Protect from sunlight. The acute and chronic health effect statements above are for the pure chemicals only, unless noted. Pure, concentrated TGIC is toxic to humans. At the concentration TGIC is found in powder coatings, it is not toxic and only contributes to nuisance dust. Page 3 of 10 Although this material is a powder coating with low toxicity, follow precautions of this Safety Data Sheet to prevent over- exposure. This product may contain Barium Sulfate. The USEPA published the final rule in the June 28, 1994 Federal Register deleating Barium Sulfate from the category "Barium Compounds." Carbon Black is not a hazardous substance or preparation under GHS. Page 4 of 10

2.1 Classification of the substance or mixture

Health, Acute toxicity, 5 Inhalation Health, Specific target organ toxicity - Single exposure, 3 Health, Acute toxicity, 5 Dermal Health, Skin corrosion/irritation, 2 GHS Phrases: H303 - May be harmful if swallowed H333 - May be harmful if inhaled H336 - May cause drowsiness or dizziness H313 - May be harmful in contact with skin H315 - Causes skin irritation GHS Precautionary Statements: P101 - If medical advice is needed, have product container or label at hand.