H Series Powder Coatings

Hazard statements (CLP)

H303, H317, H320, H333

Code

Statements

H303

May be harmful if swallowed

Principle Routes of Exposure

Inhalation, Ingestion, Skin Absorption, Eye Contact Target Organs: Respiratory System Inhalation: May cause irritation of the respiratory tract. Prolonged or repeated exposure causes lung damage. Skin Contact: May cause skin irritation. Eye Contact: Dust may cause irritation and inflammation. Ingestion: No adverse health effects are expected from swallowing. NFPA: Health = 2, Fire = 1, Reactivity = 0 HMIS III: H2/F1/PH0 2 1 2 0 F | Safety Glasses, Gloves, Apron, Dust Respirator Page 2 of 10

Signal word

WARNING

2.1 Classification of the substance or mixture

Health, Respiratory or skin sensitization, 1 Skin Health, Acute toxicity, 5 Inhalation Health, Acute toxicity, 5 Oral Health, Serious Eye Damage/Eye Irritation, 2 B

Hazard statements

H317 - May cause an allergic skin reaction H333 - May be harmful if inhaled H303 - May be harmful if swallowed H320 - Causes eye irritation

Precautionary statements

P101 - If medical advice is needed, have product container or label at hand. P102 - Keep out of reach of children. P103 - Read label before use. P202 - Do not handle until all safety precautions have been read and understood. P210 - Keep away from heat/sparks/open flames/hot surfaces. No smoking P211 - Do not spray on an open flame or other igntion source. P221 - Take any precaution to avoid mixing with combustibles. P232 - Protect from moisture. P234 - Keep only in original container. P235+410 - Keep cool. Protect from sunlight. P240 - Ground/bond container and receiving equipment. P241 - Use explosion-proof electrical/ventilating/light/equipment. P242 - Use only non-sparking tools. P243 - Take precautionary measures against static discharge. P250 - Do not subject to grinding/shock/friction. P251 - Pressurized container: Do not pierce or burn, even after use. P261 - Avoid breathing dust/fume/gas/mist/vapours/spray. P262 - Do not get in eyes, on skin, or on clothing. P263 - Avoid contact during pregnancy/while nursing. P264 - Wash _ thoroughly after handling. P270 - Do not eat, drink or smoke when using this product. P271 - Use only outdoors or in a well-ventilated area. P281 - Use personal protective equipment as required. P284 - Wear respiratory protection. P301+330+331 - IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. P302+350 - IF ON SKIN: Gently wash with soap and water. P304+341 - IF INHALED: If breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing. P332+313 - If skin irritation occurs: Get medical advice/attention. P340 - Remove victim to fresh air and keep at rest in a position comfortable for breathing. P370+380 - In case of fire: Evacuate area. P373 - DO NOT fight fire when fire reaches explosives. P381 - Eliminate all ignition sources if safe to do so. P403+233 - Store in a well ventilated place. Keep container tightly closed. P410+403 - Protect from sunlight. Store in a well ventilated place. Page 3 of 10 The acute and chronic health statements above are for pure chemicals only, unless noted. Although this product is a powder coating with low toxicity, follow precautions of this Safety Data Sheet to prevent over- exposure. Pure, concentrated TGIC is toxic to humans. At the concentration TGIC is found in powder coatings, it is not toxic, and only contributes to nuisance dust. Carbon Black is not a hazardous substance or preparation under GHS. This product may contain Barium Sulfate. The USEPA published the final rule in the June 28, 1994 Federal Register deleting Barium Sulfate from the category "Barium Compounds." Page 4 of 10