Note: Ingredients listed on restricted chemical lists
EC/CAS
202-966-0/101-68-8
Name of the chemical
4,4’-Methylenediphenyl diisocyanate
Concentration
<1%
General Information
Revision date
2017-06-29
Product name
NEOTEX PU JOINT
1.2.1 Relevant identified uses
Not defined
1.2.2. Uses advised against
All uses not specified in this section or in section 7.3
Icons in SDS
Company Information
company name
NEOTEX S.A
e-mail address of the competent person responsible for the Safety Data Sheet
support@neotex.gr
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H312, H334
Hazard statements
Code
Statements
H312
Harmful in contact with skin
Section 2
2.1 Classification of the substance or mixture
CLP Regulation (EC) No 1272/2008: Classification of this product has been carried out in accordance with CLP Regulation (EC) No 1272/2008. Acute Tox. 4: Acute toxicity on contact with skin, Category 4, H312 Resp. Sens. 1: Sensitisation, respiratory, Category 1, H334
2.2 Label elements
CLP Regulation (EC) No 1272/2008: Danger
Hazard statements
Acute Tox. 4: H312 - Harmful in contact with skin Resp. Sens. 1: H334 - May cause allergy or asthma symptoms or breathing difficulties if inhaled
Precautionary statements
P101: If medical advice is needed, have product container or label at hand P102: Keep out of reach of children P261: Avoid breathing dust/fume/gas/mist/vapours/spray P280: Wear protective gloves/protective clothing/eye protection/face protection P302+P352 IF ON SKIN Wash with plenty of water P304+P340 IF INHALED Remove person to fresh air and keep comfortable for breathing P312: Call a POISON CENTER/doctor if you feel unwell P501: Dispose of contents/container according to the separated collection system used in your municipality
Supplemental label elements
EUH204: Contains isocyanates. May produce an allergic reaction
Additional information
Annex XVII, REACH) Persons already sensitised to diisocyanates may develop allergic reactions when using this product. Persons suffering from asthma, eczema or skin problems should avoid contact, including dermal contact, with this product. This product should not be used under conditions of poor ventilation unless a protective mask with an appropriate gas filter (i.e. type A1 according to standard EN 14387) is used.
2.3 Other hazards
Product fails to meet PBT/vPvB criteria
