Note: Ingredients listed on restricted chemical lists
EC/CAS
232-674-9/9004-34-6
Name of the chemical
cellulose
Concentration
≥10
General Information
Version
2.0
Revision date
2025-08-20
Product name
MAX 1 Aqueous Extraction
Emergency telephone
1-800-498-5743, 1-651-523-0318, 1-800-424-9300, 1-703-527-3887
Icons in SDS
Company Information
company name
Neogen Corporation
e-mail address of the competent person responsible for the Safety Data Sheet
sds@neogen.com
GHS Information
Signal word
Warning
Hazard Codes
Hazard statements (CLP)
H373
Hazard statements
Code
Statements
H373
May cause damage to organs through prolonged or repeated exposure
Section 2
SECTION 2: Hazards identification
According to Regulation (EC) No. 1272/2008 (CLP) Classification of the substance or mixture
Adverse physicochemical, human health and environmental effects
May cause damage to organs through prolonged or repeated exposure
Hazard pictograms
GHS08
Signal word
Warning
Contains
(2-Hydroxypropyl)-β-cyclodextrin
Hazard statements
H373 - May cause damage to organs through prolonged or repeated exposure.
Precautionary statements
P314 - Get medical advice/attention if you feel unwell.
2.3 Other hazards
Contains no PBT and/or vPvB substances ≥ 0.1% assessed in accordance with REACH Annex XIII Component Substance(s) not meeting the PBT criteria of REACH Sodium chloride (7647-14-5) regulation, in accordance with Annex XIII Substance(s) not meeting the vPvB criteria of REACH Sodium chloride (7647-14-5) regulation, in accordance with Annex XIII The mixture does not contain substance(s) included in the list established in accordance with Article 59(1) of REACH for having endocrine disrupting properties, or substance(s) are not identified as having endocrine disrupting properties in accordance with the criteria set out in Commission Delegated Regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at a concentration equal to or greater than 0,1 %
2.1 Classification of the substance or mixture
Classification according to Regulation (EC) No. 1272/2008 [CLP] Specific target organ toxicity – Repeated exposure, Category 2 H373 Full text of H- and EUH-statements: see section 16 Adverse physicochemical, human health and environmental effects May cause damage to organs through prolonged or repeated exposure. 2.2. Label elements Labelling according to Regulation (EC) No. 1272/2008 [CLP] Hazard pictograms (CLP) : GHS08 Signal word (CLP) : Warning Contains : (2-Hydroxypropyl)-β-cyclodextrin Hazard statements (CLP) : H373 - May cause damage to organs through prolonged or repeated exposure. Precautionary statements (CLP) : P314 - Get medical advice/attention if you feel unwell. 2.3. Other hazards Contains no PBT and/or vPvB substances ≥ 0.1% assessed in accordance with REACH Annex XIII Component Substance(s) not meeting the PBT criteria of REACH Sodium chloride (7647-14-5) regulation, in accordance with Annex XIII Substance(s) not meeting the vPvB criteria of REACH Sodium chloride (7647-14-5) regulation, in accordance with Annex XIII The mixture does not contain substance(s) included in the list established in accordance with Article 59(1) of REACH for having endocrine disrupting properties, or substance(s) are not identified as having endocrine disrupting properties in accordance with the criteria set out in Commission Delegated Regulation (EU) 2017/2100 or Commission Regulation (EU) 2018/605 at a concentration equal to or greater than 0,1 % SECTION 3: Composition/information on ingredients 3.2. Mixtures Name Product identifier % Classification according to Regulation (EC) No. 1272/2008 [CLP] (2-Hydroxypropyl)-β-cyclodextrin CAS-No.: 128446-35-5 ≥ 50 – < 75 STOT RE 2, H373 Sodium chloride CAS-No.: 7647-14-5 ≥ 10 – < 15 Not classified substance with national workplace exposure limit(s) EC-No.: 231-598-3 (LT, LV) Microcrystalline cellulose CAS-No.: 9004-34-6 ≥ 10 – < 15 Not classified substance with national workplace exposure limit(s) EC-No.: 232-674-9 (BE, EE, ES, FR, GB, HR, IE, LV, PT, RO, CH) Full text of H- and EUH-statements: see section 16 SECTION 4: First aid measures 4.1. Description of first aid measures First-aid measures general : Get medical advice/attention if you feel unwell. First-aid measures after inhalation : Remove person to fresh air and keep comfortable for breathing. First-aid measures after skin contact : Wash skin with plenty of water. First-aid measures after eye contact : Rinse eyes with water as a precaution. First-aid measures after ingestion : Call a poison center or a doctor if you feel unwell. Self protection of the first-aider : First aid workers will be equipped with suitable personal protective equipment. 4.2. Most important symptoms and effects, both acute and delayed Symptoms/effects after inhalation : None under normal conditions. Dust of the product, if present, may cause respiratory irritation after excessive inhalation exposure. Symptoms/effects after skin contact : None under normal conditions. Dust may cause irritation in skin folds or by contact in combination with tight clothing. Symptoms/effects after eye contact : None under normal conditions. Dust from this product may cause eye irritation. Symptoms/effects after ingestion : None under normal conditions. 4.3. Indication of any immediate medical attention and special treatment needed Treat symptomatically. SECTION 5: Firefighting measures 5.1. Extinguishing media Suitable extinguishing media : Water spray. Dry powder. Foam. Unsuitable extinguishing media : Do not use a heavy water stream. 5.2. Special hazards arising from the substance or mixture Fire hazard : No fire hazard. Explosion hazard : No direct explosion hazard. Hazardous decomposition products in case of fire : Toxic fumes may be released. 5.3. Advice for firefighters Firefighting instructions : Fight fire from safe distance and protected location. Do not enter fire area without proper protective equipment, including respiratory protection. Protection during firefighting : Do not attempt to take action without suitable protective equipment. Self-contained breathing apparatus. Complete protective clothing. SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures General measures : Notify authorities if product enters sewers or public waters. Absorb spillage to prevent material damage. For non-emergency personnel Protective equipment : Wear recommended personal protective equipment. Emergency procedures : Ventilate spillage area. Do not breathe dust/fume/gas/mist/vapours/spray. For emergency responders Protective equipment : Do not attempt to take action without suitable protective equipment. For further information refer to section 8: "Exposure controls/personal protection". Emergency procedures : Evacuate unnecessary personnel. 6.2. Environmental precautions Avoid release to the environment. 6.3. Methods and material for containment and cleaning up For containment : Using a clean shovel, put the material in a dry container and cover without compressing it. Methods for cleaning up : Mechanically recover the product. Other information : Dispose of materials or solid residues at an authorized site. 6.4. Reference to other sections For further information refer to section 13. SECTION 7: Handling and storage 7.1. Precautions for safe handling Precautions for safe handling : Ensure good ventilation of the work station. Wear personal protective equipment. Do not breathe dust/fume/gas/mist/vapours/spray. Hygiene measures : Do not eat, drink or smoke when using this product. Always wash hands after handling the product. 7.2. Conditions for safe storage, including any incompatibilities Technical measures : Keep in a cool, well-ventilated place away from heat. Storage conditions : Keep cool. Protect from sunlight. Storage temperature : 2 – 30 °C Packaging materials : Store always product in container of same material as original container. 7.3. Specific end use(s) No additional information available SECTION 8: Exposure controls/personal protection 8.1. Control parameters National occupational exposure and biological limit values Microcrystalline cellulose (9004-34-6) Ireland - Occupational Exposure Limits Local name Cellulose OEL TWA 10 mg/m³ Remark Advisory OELV (Advisory Occupational Exposure Limit Values) Regulatory reference Chemical Agents Code of Practice 2024 8.2. Exposure controls Appropriate engineering controls Appropriate engineering controls: Ensure good ventilation of the work station. Personal protection equipment Personal protective equipment: Wear recommended personal protective equipment. Personal protective equipment symbol(s): Eye and face protection Eye protection: Safety glasses Skin protection Skin and body protection: Wear suitable protective clothing Hand protection: Protective gloves