DYNABOND Two-Part Quick Set Frame Adhesive

Hazard statements (CLP)

H225, H319, H336

Code

Statements

H225

Highly Flammable liquid and vapour

SECTION 2: Hazards identification

2.1 Classification of the substance or mixture

Health: Eye Irritation, Category 2A Target Organ Toxicity (Single exposure), Category 3 Physical: Flammable Liquids, Category 2

2.2 Label elements

GHS02 GHS07

Signal word

DANGER

Hazard statements

H225: Highly flammable liquid and vapor. H319: Causes serious eye irritation. H336: May cause drowsiness or dizziness.

Prevention

P210: Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking. P233: Keep container tightly closed. P240: Ground and bond container and receiving equipment. P241: Use explosion-proof [electrical/ventilation/lighting/...] equipment. P242: Use non-sparking tools. P243: Take action to prevent static discharges. P280: Wear protective gloves/protective clothing/eye protection/face protection. P264: Wash skin thoroughly after handling. P261: Avoid breathing dust/fume/gas/mist/vapors/spray. P271: Use only outdoors or in a well-ventilated area.

Response

P303+P361+P353 IF ON SKIN (or hair) Take off immediately all contaminated clothing. Rinse skin with water [or shower]. P370+P378 In case of fire Use water spray, alcohol resistant foam, dry chemical, or carbon dioxide to extinguish P305+P351+P338 IF IN EYES Rinse carefully with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. P337+P313 If eye irritation persists Get medical advice/attention P304+P340 IF INHALED Remove person to fresh air and keep comfortable for breathing P312: Call a POISON CENTER/doctor/physician if you feel unwell.

Storage

P235: Keep cool. P403+P233: Store in a well-ventilated place. Keep container tightly closed. P405: Store locked up.

Disposal

P501: Dispose of contents/container in accordance with applicable federal/state/local regulations.