Note: Ingredients listed on restricted chemical lists
EC/CAS
124594-15-6
Name of the chemical
Sulfamic acid, nickel(2+) salt (2:1), tetrahydrate (9CI)
Concentration
N/A
EC/CAS
7732-18-5
Name of the chemical
Water, distilled, conductivity or of similar purity H2O
Concentration
N/A
EC/CAS
237-396-1
Name of the chemical
Nickel bis(sulphamidate)
Concentration
N/A
EC/CAS
231-791-2
Name of the chemical
Water, distilled, conductivity or of similar purity H2O
Concentration
N/A
General Information
Revision date
2017-07-12
Product name
Wetting Agent Plating Additive
1.2.1 Relevant identified uses
For laboratory and R&D use only
Manufacturer Name
NANO3D Systems LLC
Emergency telephone
1-800-424-9300
Icons in SDS
Company Information
company name
NANO3D Systems LLC
e-mail address of the competent person responsible for the Safety Data Sheet
info@nano3dsystems.com
GHS Information
Signal word
Danger
Section 2
2.1 Classification of the substance or mixture
none Acute toxicity, Oral Category 4 Serious Eye Damage Category 1 Respiratory sensitization Category 1 Skin sensitization Category 1 Germ cell mutagenicity Category 2 Carcinogenicity, Inhalation Category 1B Reproductive toxicity Category 1B Specific target organ toxicity – repeated exposure Category 1 Acute aquatic toxicity Category 1 Chronic aquatic toxicity Category 1
Signal word
Danger
Hazard statements
Harmful if swallowed. May cause an allergic reaction. Causes serious eye damage. May cause allergy or asthma symptoms or breathing difficulties if inhaled. Suspected of causing genetic defects. May cause cancer by inhalation. May damage fertility or the unborn child. Causes damage to organs through prolonged or repeated exposure. Very toxic to aquatic life with long lasting effects.
Precautionary statements
Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Do not eat, drink or smoke when using this product. Do not breathe dust, fumes, gas, mist, vapors and spray. Wash hands thoroughly after handling. Wear protective gloves, clothing, eye protection and face protection. If inadequate ventilation wear respiratory protection. IF SWALLOWED: Call a poison center or physician if you feel unwell. Rinse mouth. DO NOT induce vomiting. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Wash skin with soap and plenty of water. If irritation persists contact a physician. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a poison center or physician. If exposed or concerned: Get medical advice. Remove contaminated clothing and wash before reuse. Keep only in original container. Avoid release to the environment. Absorb spillage to prevent material damage. Collect spillage. Dispose of content and container in accordance with local, state, and federal regulations.
2.3 Other hazards
None
