High-Speed Steal Tool

SECTION 2: Hazards identification

2.1 Classification of the substance or mixture

(If Mn,Cr,W,Mo,Co is contained, the hazards of the single element has the following classification.)

Health hazards

Serious Eye Damage/Eye Irritatio Category 2B Respiratory Sensitization Category 1 Skin Sensitization Category 1 Germ Cell Mutagenicity Category 2 Carcinogenicity Category 2 Reproductive Toxicity Category 1B Specific Target Organ Toxicity-Single Exposure Category１ Category２ Category 3 Specific Target Organ Toxicity-Repeated Exposure：Category 1

Environmental hazards

Aquatic toxicity：Category 4 The above not listed in the hazards (physical hazards, etc.) is out of category, classification excluded, or it can not be classified.

Signal word

Danger

2.3 Other hazards

・High-Speed Tool Steel Tool is physically and chemically stable in solid form. There is no physical or chemical hazard such as ignition ability or flammability. There is no human health hazard such as reproductive toxicity. There is no environmental hazard such as acute aquatic toxicity. ・Although not classified in GHS classifications, when dust or fine powder of grinding dust of the tool is dry or deposited together with oil and grease, it becomes pyrophoric or highly flammable. ・The inhalation of dust produced through dry surface grinding processes may cause lung disorders such as pneumoconiosis. Note of caution Safety measure ・Do not handle until all safety precautions have been read and understood. ・Use the appropriate personal protective equipment and ventilation equipment, to avoid exposure. ・Do not breathe dust, fumes, vapor and spray. ・Contaminated work clothes can not be allowed out of the workplace. ・Be laundered before re-use contaminated clothing. ・Do not eat, drink or smoke when using this product. ・Avoid release to the environment.