Note: Ingredients listed on restricted chemical lists
EC/CAS
9016-87-9
Name of the chemical
4,4'-Methylendiphenyldiisocyanat tech. (Polymeres) MDI, pMDI (in Form atembarer Aerosole, A-Fraktion)
Concentration
N/A
EC/CAS
101-68-8
Name of the chemical
4,4’-Methylenediphenyl diisocyanate
Concentration
N/A
EC/CAS
26471-62-5
Name of the chemical
m-Tolylidendiisocyanat
Concentration
N/A
General Information
Revision date
2021-10-14
Product name
Multi-Gel Resin
supplier name
Multiurethanes Ltd
Emergency telephone
1-800-663-6633
Icons in SDS
Company Information
company name
Multiurethanes Ltd
GHS Information
Signal word
DANGER
Section 2
2.1 Classification of the substance or mixture
Acute Toxicity (Inhalation) Category 4 Skin Corrosion/Irritation Category 2 Serious Eye Damage/Eye Category 2A Irritation Respiratory Sensitization Category 1 Skin Sensitization Category 1 Carcinogenicity Category 2 Specific Target Organ Toxicity Category 2 - Repeated Exposure (Respiratory System)
Signal word
DANGER
Hazard statements
Harmful if inhaled. Causes serious eye irritation. Causes skin irritation. May cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause an allergic skin reaction. Suspected of causing cancer. May cause damage to organs through prolonged or repeated exposure (respiratory system).
Prevention
Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear appropriate protective equipment. Avoid breathing fume/mist/vapours. Use only outdoors or in a well-ventilated area. Wash hands thoroughly after handling.
Response
IF ON SKIN: Wash with plenty of soap and water. If irritation or rash occurs, seek medical attention. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If irritation persists, seek medical attention. IF INHALED: If breathing is difficult, remove person to fresh air and keep comfortable for breathing. Seek medical attention.
Storage
Keep container tightly closed and sealed until ready for use. Store in original container protected from sunlight in a dry, cool, and well-ventilated area. Keep away from incompatibles.
Disposal
Dispose of material in accordance with all applicable federal, state/provincial, and local laws and regulations. Regulations may vary in different locations. Waste characterizations and compliance with applicable laws are the sole responsibility of the waste generator.
2.3 Other hazards
None known