Note: Ingredients listed on restricted chemical lists
EC/CAS
9016-87-9
Name of the chemical
4,4'-Methylendiphenyldiisocyanat tech. (Polymeres) MDI, pMDI (in Form atembarer Aerosole, A-Fraktion)
Concentration
15-40%
EC/CAS
101-68-8
Name of the chemical
4,4’-Methylenediphenyl diisocyanate
Concentration
15-40%
EC/CAS
5873-54-1
Name of the chemical
2,4’-Methylenediphenyl diisocyanate
Concentration
1-5%
EC/CAS
2536-05-2
Name of the chemical
2,2’-Methylenediphenyl diisocyanate
Concentration
0.1-1%
General Information
Revision date
2024-07-04
Product name
MME Universal Resin
1.2.1 Relevant identified uses
Hydrophobic polyurethane resin for water cut-off applications
supplier name
Multiurethanes Ltd
Emergency telephone
1-800-663-6633
Icons in SDS
Company Information
company name
Multiurethanes Ltd
GHS Information
Signal word
DANGER
Hazard Codes
Hazard statements (CLP)
H315, H317, H320, H332, H334, H335, H372
Hazard statements
Code
Statements
H315
Causes skin irritation
Section 2
SECTION 2: Hazards identification
(29 CFR 1910.1200) Classification
Signal word
DANGER
Hazard statements
Causes skin irritation. May cause an allergic skin reaction. Causes eye irritation. Harmful if inhaled. May cause allergy or asthma symptoms or breathing difficulties if inhaled. May cause respiratory irritation. Causes damage to organs (respiratory system) through prolonged or repeated exposure.
Prevention
Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Wear appropriate protective equipment. Avoid breathing fume/mist/vapours. Use only outdoors or in a well-ventilated area. Wash hands thoroughly after handling.
Response
IF ON SKIN: Wash with plenty of soap and water. If irritation or rash occurs, seek medical attention. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists, seek medical attention. IF INHALED: If breathing is difficult, remove person to fresh air and keep comfortable for breathing. Seek medical attention.
Storage
Keep container tightly closed and sealed until ready for use. Store in original container protected from high temperatures. Keep away from incompatibles.
Disposal
Dispose of material in accordance with all applicable federal, state/provincial, and local laws and regulations. Regulations may vary in different locations. Waste characterizations and compliance with applicable laws are the sole responsibility of the waste generator.
2.3 Other hazards
4% of the mixture consists of ingredients of unknown acute toxicity (oral/inhalation). 35% of the mixture consists of ingredients of unknown acute toxicity (dermal).
2.1 Classification of the substance or mixture
This material is considered hazardous by the OSHA Hazard Communication Standard (29 CFR 1910.1200). Skin Irritation - Category 2 Skin Sensitization - Category 1 Eye Damage/Eye Irritation - Category 2B Acute Toxicity, Inhalation – Category 4 Respiratory Sensitization - Category 1 Specific Target Organ Toxicity (Single Exposure) - Category 3 Specific Target Organ Toxicity (Repeated Exposure) - Category 1
