Multicore TTC-1 Tip Tinner/Cleaner

Multicore Solders Ltd

Revision date : 2002-02-12

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
Health risk rating
Safety risk rating
Environmental risk rating

General Information

Revision date

2002-02-12

Product name

Multicore TTC-1 Tip Tinner/Cleaner

Manufacturer Name

Multicore Solders Ltd

Icons in SDS

Company Information

company name

Multicore Solders Ltd

Section 2

SECTION 2: Hazards identification

Inhalation of the fumes given off during use may irritate the nose, throat and respiratory system. Lead, if absorbed into the body of a pregnant woman, can cause developmental abnormalities in the nervous system of the foetus. 4. FIRST- 1D MEASURES Inhalation Flux fumes emitted during use may irritate the nose and throat and respiratory system. Remove patient to fresh air, Obtain medical attention if there is any respiratory distress. Ingestion May cause irritation of the gastric tract. If the casualty is unconscious but breathing, place on one side in the recovery position. if breathing has stopped apply artificial respiration or give oxygen by mask. If the patient is conscious, then encourage the patient to rinse the mouth out several times with water. Do not induce vomiting or give anything to drink if the patient finds it difficult to swallow. Obtain urgent medical attention. Skin Contact Prolonged contact may cause irritation. Wash hands with soap and water after handling solder. If any skin irritation persists seek medical attention. Issue No: 4 Number: HS TTCt | Page 1 of 4 Date: 12 February 2002 Prepared by: Barry Chase Authorised by: Barry Chase This is an uncontrolled copy within Multicore Solders’ ISO 9007 system. Recipients are advised to check that they have the current version after 12 months from the issue date. Eye Contact Irritating and abrasive. Flush immediately with plenty of water. Ensure that the eyeball and the inside of the eyelids are properly bathed by gently prising open the eyelids. Obtain urgent medical attention. Also make sure that the contaminated water runs off the face away from the eyes, 5, FIRE FIGHTING MEASURES Extinguishers Suitable - dry chemical, carbon dioxide, water spray or foam. Unsuitable - water jet Temperatures above 500°C may produce heavy metal dust, fumes and/or vapours. The flux will give rise to irritating fumes. Fire fighters should wear full protective clothing and positive pressure breathing apparatus.

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.