Note: Ingredients listed on restricted chemical lists
EC/CAS
202-966-0/101-68-8
Name of the chemical
4,4’-Methylenediphenyl diisocyanate
Concentration
30 to 60%
EC/CAS
618-498-9/9016-87-9
Name of the chemical
4,4'-Methylendiphenyldiisocyanat tech. (Polymeres) MDI, pMDI (in Form atembarer Aerosole, A-Fraktion)
Concentration
30 to 60%
EC/CAS
247-714-0/26447-40-5
Name of the chemical
Methylenediphenyl diisocyanate (see also specific isomers)
Concentration
<10%
General Information
Version
2.6
Revision date
2024-05-28
Product name
XPANDA FOAM PART B
Product Synonyms
XPANDA PART B - MANUFACTURER CODE
1.2.1 Relevant identified uses
ADHESIVE - POLYURETHANE ● POLYURETHANE ADHESIVE This product is used in conjunction with XPANDA FOAM PART A . Please refer to the appropriate SDS before use
supplier name
MUDEX (PTY) LTD
Emergency telephone
+61 427 558 155, +27 73 639 3625
Icons in SDS
Company Information
company name
MUDEX (PTY) LTD
e-mail address of the competent person responsible for the Safety Data Sheet
info@mudex.com.au, mgoosen@mudex.com.au
GHS Information
Signal word
DANGER
Hazard Codes
Hazard statements (CLP)
H315, H317, H319, H332, H334, H335, H351, H373
Hazard statements
Code
Statements
H315
Causes skin irritation
Section 2
SECTION 2: Hazards identification
Classification of the substance or mixture
Physical hazards
Not classified as a Physical Hazard
Health hazards
Skin Corrosion/Irritation: Category 2 Skin Sensitisation: Category 1 Serious Eye Damage / Eye Irritation: Category 2A Acute Toxicity: Inhalation: Category 4 Respiratory Sensitisation: Category 1 Specific Target Organ Toxicity (Single Exposure): Category 3 (Respiratory Irritation) Carcinogenicity: Category 2 Specific Target Organ Toxicity (Repeated Exposure): Category 2
Environmental hazards
Not classified as an Environmental Hazard
Signal word
DANGER
Hazard statements
H315 Causes skin irritation. H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H332 Harmful if inhaled. H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled. H335 May cause respiratory irritation. H351 Suspected of causing cancer. H373 May cause damage to organs through prolonged or repeated exposure.
Prevention
P202 Do not handle until all safety precautions have been read and understood. P260 Do not breathe dust/fume/gas/mist/vapours/spray. P264 Wash thoroughly after handling. P271 Use only outdoors or in a well-ventilated area. P272 Contaminated work clothing should not be allowed out of the workplace. P280 Wear protective gloves/protective clothing/eye protection/face protection/hearing protection. P284 Wear respiratory protection.
Response
P302 + P352 IF ON SKIN: Wash with plenty of water. P304 + P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P308 + P313 IF exposed or concerned: Get medical advice/ attention. P321 Specific treatment is advised - see first aid instructions. P362 + P364 Take off contaminated clothing and wash it before reuse.
Storage
P403 + P233 Store in a well-ventilated place. Keep container tightly closed. P405 Store locked up.
Disposal
P501 Dispose of contents/container in accordance with relevant regulations.
Other hazards
No information provided
2.1 Classification of the substance or mixture
CLASSIFIED AS HAZARDOUS ACCORDING TO SAFE WORK AUSTRALIA CRITERIA Physical Hazards Not classified as a Physical Hazard Health Hazards Skin Corrosion/Irritation: Category 2 Skin Sensitisation: Category 1 Serious Eye Damage / Eye Irritation: Category 2A Acute Toxicity: Inhalation: Category 4 Respiratory Sensitisation: Category 1 Specific Target Organ Toxicity (Single Exposure): Category 3 (Respiratory Irritation) Carcinogenicity: Category 2 Specific Target Organ Toxicity (Repeated Exposure): Category 2 Environmental Hazards Not classified as an Environmental Hazard
