Note: Ingredients listed on restricted chemical lists
EC/CAS
205-500-4/141-78-6
Name of the chemical
acetic acid, ethyl ester
Concentration
N/A
General Information
Revision date
2016-10-19
Product name
SOLO GOYA Clear lacquer
CAS No.
141-78-6
REACH No
Colorless,
1.2.1 Relevant identified uses
Colorless, fast-drying, non-sticking, semi-glossy coating lacquer for matt and glossy water-based
supplier name
Mrs. Treiber
Emergency telephone
+49 (0) 9545 925-0
Icons in SDS
Company Information
company name
Mrs. Treiber
e-mail address of the competent person responsible for the Safety Data Sheet
info@c-kreul.de, b.treiber@c-kreul.de
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H225, H319, H336
Hazard statements
Code
Statements
H225
Highly Flammable liquid and vapour
Section 2
CLP CLASSIFICATION
Flam. Liq. 2 H225; Eye Irrit. 2 H319; STOT SE 3 H336; EUH066 Labelling according to Regulation (EC) 1272/2008 Hazard pictogram and signal word of the product Danger
Hazardous Ingredients
Ethyl acetate, CAS-Nr. 141-78-6.
Hazard statements
H225 Highly flammable liquid and vapour. H319 Causes serious eye irritation. H336 May cause drowsiness or dizziness. European hazard statements EUH066 Repeated exposure may cause skin dryness or cracking.
Precautionary statements
P101 If medical advice is needed, have product container or label at hand. P102 Keep out of reach of children. P210 Keep away from heat/sparks/open flames/hot surfaces. — No smoking. P271 Use only outdoors or in a well-ventilated area. P280 Wear protective gloves/protective clothing/eye protection/face protection. P312 Call a POISON CENTER or doctor/physician if you feel unwell. P305+351 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact 338 lenses, if present and easy to do. Continue rinsing. P337+313 If eye irritation persists: Get medical advice/attention. P370+378 In case of fire: Use sand, CO2, dry powder for extinction. P501 Dispose of contents/container to hazardous or special waste collection point.
2.3 Other hazards
Vapours may form explosive mixtures with air. This material is combustible and can be ignited by heat, sparks, flames, or other sources of ignition (e.g. static electricity, pilot lights, or mechanical / electrical equipment). Take precautionary measures against static discharges.
Results of PBT and vPvB assessment
Not applicable
