MemBond TPO Membrane Adhesive

Moy Materials Ltd.

Revision date : 2022-06-30

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS02 GHS07 GHS09
Health risk rating 2
Safety risk rating 3
Environmental risk rating 4

Note: Ingredients listed on restricted chemical lists

EC/CAS

205-500-4/141-78-6

Name of the chemical

acetic acid, ethyl ester

Concentration

60% 10-30%

EC/CAS

203-777-6/110-54-3

Name of the chemical

n-Hexan (790/2009)

Concentration

<1%

General Information

Version

1.0

Revision date

2022-06-30

Product name

MemBond TPO Membrane Adhesive

1.2.1 Relevant identified uses

Adhesive

Emergency telephone

+44 (0) 1827 69662

Icons in SDS

GHS02 GHS07 GHS09 M004 M008 M009 M010 T013

Company Information

company name

Moy Materials Ltd.

e-mail address of the competent person responsible for the Safety Data Sheet

info@moymaterials.com

GHS Information

Signal word

Danger

Hazard Codes

Hazard statements (CLP)

H225, H315, H319, H336, H411

Hazard statements

Code

Statements

H225

Highly Flammable liquid and vapour

Section 2

SECTION 2: Hazards identification

Classification of the substance or mixture Classification (SI 2019 No. 720)

Physical hazards

Flam. Liq. 2 - H225

Health hazards

Skin Irrit. 2 - H315 Eye Irrit. 2 - H319 STOT SE 3 - H336

Environmental hazards

Aquatic Chronic 2 - H411 Physicochemical The product is highly flammable. Vapours may form explosive mixtures with air. Vapours are heavier than air and may travel along the floor and accumulate in the bottom of containers. Vapours may be ignited by a spark, a hot surface or an ember

Signal word

Danger

Hazard statements

H225 Highly flammable liquid and vapour. H315 Causes skin irritation. H319 Causes serious eye irritation. H336 May cause drowsiness or dizziness. H411 Toxic to aquatic life with long lasting effects.

Precautionary statements

P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P260 Do not breathe dust/ fume/ gas/ mist/ vapours/ spray. P271 Use only outdoors or in a well-ventilated area. P273 Avoid release to the environment. P280 Wear protective gloves/ protective clothing/ eye protection/ face protection. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P313 Get medical advice/ attention. P501 Dispose of contents/ container in accordance with national regulations. As from 24 August 2023, adequate training is required before industrial or professional use.

Contains

hydrocarbons, C6-C7,n-alkanes, isoalkanes, cyclics, <5% n-hexane, Ethyl acetate

2.3 Other hazards

This product does not contain any substances classified as PBT or vPvB.

2.1 Classification of the substance or mixture

Classification (SI 2019 No. 720) Physical hazards Flam. Liq. 2 - H225 Health hazards Skin Irrit. 2 - H315 Eye Irrit. 2 - H319 STOT SE 3 - H336 Environmental hazards Aquatic Chronic 2 - H411 Physicochemical The product is highly flammable. Vapours may form explosive mixtures with air. Vapours are heavier than air and may travel along the floor and accumulate in the bottom of containers. Vapours may be ignited by a spark, a hot surface or an ember.

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.