Note: Ingredients listed on restricted chemical lists
EC/CAS
231-072-3/7429-90-5
Name of the chemical
Aluminium
Concentration
N/A
EC/CAS
231-131-3/7440-22-4
Name of the chemical
Silver
Concentration
N/A
EC/CAS
231-159-6/7440-50-8
Name of the chemical
Copper
Concentration
N/A
EC/CAS
231-141-8/7440-31-5
Name of the chemical
Organometallic tin
Concentration
N/A
EC/CAS
200-338-0/57-55-6
Name of the chemical
1,2-propanediol
Concentration
N/A
General Information
Revision date
2016-04-21
Product name
Brazing Alloy Pastes with titanium hydride and non-flammable organic binders
Icons in SDS
Company Information
company name
Morgan Advanced Materials/Wesgo Metals
e-mail address of the competent person responsible for the Safety Data Sheet
mtchayward.msds@morganplc.com
GHS Information
Signal word
Warning
Hazard Codes
Hazard statements (CLP)
H319
Hazard statements
Code
Statements
H319
Causes serious eye irritation
Section 2
SECTION 2: Hazards identification
Classification according to Regulation (EC) No. 1272/2008 [CLP These products are sold in a paste-like form in small containers and syringes. Containers and syringes should be kept sealed when not in use. Metal fumes and dust are generated during melting and brazing operations. Hazardous levels of dust or metal fumes of product constituents can create health risks, as described below. Metallic dust and particles can cause a serious fire and/or explosion hazard. Classification
Hazard statements
H319 Causes eye irritation. Note: Accompanying alpha-numeric designations included to address EU regulations.
Precautionary statements
P270 Do not eat, drink or smoke when using this product. P280A + P264 Wear protective gloves to prevent skin contact or thermal burns during brazing operations. Wash hands thoroughly after handling. P280B Wear ANSI-approved eye protection to prevent eye contact. P305 + P351 + P338 + If in eyes: Rinse cautiously with water for several minutes. Remove P337 + P313 contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical attention. P308 + P309 + P313 If exposed, concerned, or feel unwell: Get medical advice/attention. Other information about health hazards: Dust and fumes generated during brazing operations can cause skin and eye irritation. Repeated or prolonged exposure to elevated concentrations of any airborne dust or fume can irritate or harm the respiratory system, especially as an aggravation to a pre-existing condition. Inhalation of significant quantities of very fine metal dust and metal fumes can cause “metal fume fever,” with flu-like symptoms. Avoid creating and breathing airborne dust and fumes. Other information about physical hazards: Brazing and soldering operations present a fire hazard to nearby combustible materials. Finely dispersed metal particles can form ignitable and explosive mixtures in air. Maintain good housekeeping.
2.1 Classification of the substance or mixture
Under the Globally Harmonized System of Classification and Labeling and the US OSHA Hazard Communication Standard, dust and fumes released during brazing operations are categorized as hazardous: (incl. Classification according to Regulation (EC) No 1272/2008 [CLP]) Eye irritant, Category 2B H319 due to the presence of indium in Incusil-38-ABA SP and Incusil-ABA SP