Brazing Alloy Pastes and Paints containing nickel (with flammable organic

Morgan Advanced Materials/Wesgo Metals

Revision date : 2016-04-21

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS08 GHS07 GHS02
Health risk rating 4
Safety risk rating 3
Environmental risk rating 1

Note: Ingredients listed on restricted chemical lists

EC/CAS

231-159-6/7440-50-8

Name of the chemical

Copper

Concentration

N/A

EC/CAS

200-578-6/64-17-5

Name of the chemical

Ethanol

Concentration

N/A

EC/CAS

200-289-5/56-81-5

Name of the chemical

glycerol

Concentration

N/A

EC/CAS

200-338-0/57-55-6

Name of the chemical

1,2-propanediol

Concentration

N/A

EC/CAS

231-165-9/7440-57-5

Name of the chemical

Gold (nano) [INCI] (11), Colloidal Gold (nano) [INCI] [1] (11)

Concentration

N/A

EC/CAS

200-661-7/67-63-0

Name of the chemical

Propan-2-ol

Concentration

N/A

General Information

Revision date

2016-04-21

Product name

Brazing Alloy Pastes and Paints containing nickel (with flammable organic

Icons in SDS

GHS02 GHS07 GHS08

Company Information

company name

Morgan Advanced Materials/Wesgo Metals

GHS Information

Signal word

Danger

Hazard Codes

Hazard statements (CLP)

H225, H319, H351, H373

Hazard statements

Code

Statements

H225

Highly flammable liquid and vapour

H319

Causes serious eye irritation

H351

Suspected of causing cancer

H373

May cause damage to organs through prolonged or repeated exposure

Section 2

SECTION 2: Hazards identification

Classification according to Regulation (EC) No. 1272/2008 [CLP These products are sold in paste-like form or paint in small containers and syringes. These products contain flammable solvents and should be stored in sealed containers when not in use and kept away from ignition sources and hot surfaces. Flammable solvent vapors, metal fumes and dust are generated during melting and brazing operations. Hazardous levels of dust or metal fumes of product constituents can create health risks, as described below. Metallic dust and particles can cause a serious fire and/or explosion hazard. Classification

Hazard statements

H351 Suspected of causing cancer. H317 May cause allergic skin reaction. H373 May cause lung damage due to repeated or prolonged exposure. H225 Highly flammable liquid and vapor. H319 Causes eye irritation. Note: Accompanying alpha-numeric designations included to address EU regulations.

Precautionary statements

P201 Obtain special instructions before use. P202 Do not handle until all safety precautions have been read and understood. P210 Keep away from heat/sparks/open flames/hot surfaces. – No smoking. P260B Do not breathe solvent vapors, dust or fumes. P270 P280A + P264 Do not eat, drink or smoke when using this product. Wear protective gloves to prevent skin contact or thermal burns during brazing operations. Wash hands thoroughly after handling. P280B Wear ANSI-approved eye protection to prevent eye contact. P302 + P352 + If on skin: Wash with plenty of water. P333 + P313 If skin irritation or rash occurs: Get medical advice/attention. P304 + P312 If inhaled: Call a poison center or doctor if you feel unwell. P305 + P351 + P338 + If in eyes: Rinse cautiously with water for several minutes. Remove P337 + P313 contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical attention. P308 + P309 + P313 If exposed, concerned, or feel unwell: Get medical advice/attention. Other information about health hazards: Dust and fumes generated during brazing operations can cause skin and eye irritation. Repeated or prolonged exposure to elevated concentrations of any airborne dust or fume can irritate or harm the respiratory system, especially as an aggravation to a pre-existing condition. Inhalation of significant quantities of very fine metal dust and metal fumes can cause “metal fume fever,” with flu-like symptoms. Avoid creating and breathing airborne dust and fumes. Other information about physical hazards: Brazing and soldering operations present a fire hazard to nearby combustible materials. Finely dispersed metal particles can form ignitable and explosive mixtures in air. Maintain good housekeeping. –

2.1 Classification of the substance or mixture

Under the Globally Harmonized System of Classification and Labeling and the US OSHA Hazard Communication Standard, dust and fumes released during brazing operations are categorized as hazardous: (incl. Classification according to Regulation (EC) No 1272/2008 [CLP]) Carcinogenicity, Category 2 H351 due to the presence of nickel Skin sensitizer, Category 1 H317 due to the presence of nickel Specific target organ toxicity/repeated exposure, Category 2 H373 due to the presence of nickel Highly flammable liquid, Category 2 H225 Flashpoint < 23°C/73.4°F and initial boiling point > 35°C/90°F Eye irritant, Category 2B H319 due to the presence of ethanol and isopropyl alcohol

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.