PASTE WOOD FILLER

Appearance/Odor

Colored paste, mild odor - —————==—=—=======§ECTION IV - FIRE AND EXPLOSION HAZARD DATA =————=—"— i FLASH PT. 105F/41C METHOD USED: TCC o FLAMMABLE LIMITS IN AIR BY VOLUME- LOWER: 0.7% UPPER: 7.0% EXTINGUISHING MEDIA: Water spray, "alcohol” foam, dry chemical, foam, COZ, or any class B extinguishing agent. SPECIAL FIREFIGHTING PROCEDURES: Wear self-contained breathing apparatus when fighting fires in confined space. If water is used, fog nozzles are preferred. UNUSUAL FIRE AND EXPLOSION HAZARDS: Vapors aré heavier than air, may travel considerable distance to a source of ignition and flashback. Use water fog to cool containers to prevent rupturing. SECTION V — REACTIVITY DATA ———————————coo STABILITY: Yes CONDITIONS TO AVOID: N/A. INCOMPATIBILITY (MATERIALS TO AVOID): Oxidizing materials can cause a vigorous reaction. HAZARDOUS DECOMPOSITION OR BYPRODUCTS: Combustion will produce fumes, smoke, carbon dioxide, and probably carbon monoxide. HAZARDOUS POLYMERIZATION: Will not occur. =—————=—————————— GSECTION VI -

Acute Health Hazards

—————————=———=———=—=

Health hazards

(ACUTE AND CHRONIC) Harmful if inhaled, may affect the brain or nervous system, causing dizziness, headache or nausea. Causes nose, throat, eye and skin irritation. Reports have associated repeated and prolonged occupational over-exposure to solvents with permanent brain and nervous system damage. Intentional misuse by deliberately concentrating and inhaling the contents may be harmful or fatal. CARCIROGENICITY: No NTP CARCINOGEN: N/L. IARC MONOGRAPHS: N/L.

Medical Conditions Generally Aggravated by Exposure

Any medical condition, allergy, sensitization which may become worse upon exposure to the product. EMERGENCY AND FIRST AID PROCEDURES: IN EYES: Flush immediately with large amounts of water for 15 minutes. Take to physician for treatment. IF INHALED: Remove to fresh air, restore breathing. Consult a physician. IF ON SKIN: Wash areas with soap and water. Remove contaminated clothing. Consult physician. IF SWALLOWED: Do not induce vomitting. Consult physician immediately. =—==——=—=—GSECTION VII - PRECAUTIONS FOR SAFE HANDLING AND USE =—=——==—= STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Isolate, absorb and ventilate(open all windows, doors). Removal of all ignition sources, flames, hot surfaces. Avoid breathing of vapors, use respiratory protective device. WASTE DISPOSAL METHOD: In accordance with federal, state and local regulations. Before attempting clean-up, refer to hazard caution information in other sections of form. PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING: Avoid high temperatures. Keep closure tight and container upright. Do not store or use near heat, sparks or flame. Prevent prolonged or repeated breathing of vapor or spray mist. OTHER PRECAUTIONS: Do not take internally. Avoid prolonged contact with skin. DO NOT GET IN EYES. Avoid breathing of vapors or dust. KEEP OUT OF REACH OF CHILDREN! Follow label directions. —————————————=GECTION VIII - CONTROL MEASURES =—————————="— RESPIRATORY PROTECTION: Respirator, cartridge type niosh approved. VENTILATION LOCAL EXHAUST: Not Adequate. MECHANICAL: Sufficient to prevent exceeding listed TLV, Section II. PROTECTIVE GLOVES: Neoprene gloves (Hazard B or greater). EYE PROTECTION: Safety goggles (Hazard A or greater). OTHER PROTECTIVE CLOTHING OR EQUIPMENT: N/A. WORK/HYGIENIC PRACTICES: Personal contact should be avoided. Follow good housekeeping and personal hygiene. SECTION IX - DISCLAIMER To the best of our knowledge the information contained herein is accurate. All information has been obtained from sources which Mohawk Finishing Products, Inc. believes to be accurate. MATERIAL SAFETY DATA SHEET IN EYES: Flush immediately with large amounts of water for_15 minutes. Take to physician for treatment. IF INHALED: Remove to fresh air, restore breathing. consult a physician. IF ON SKIN: Wash areas with soap and water. Remove contaminated clothing. Consult physician. IF SWALLOWED: Do not induce vomitting. Consult physician immediately. SECTION VII - PRECAUTIONS FOR SAFE HANDLING AND USE = STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Isolate, absorb and ventilate(open all windows, doors). Removal of all ignition sources, flames, hot surfaces. Avoid breathing of vapors, use respiratory protective device. WASTE DISPOSAL METHOD: In accordance with federal, state and local regulations. Before attempting clean-up, refer to hazard caution information in other sections of form.

Precautionary statements

TO BE TAKEN IN HANDLING AND STORING: Avoid high temperatures. Keep closure tight and container upright. Do not store or use near heat, sparks or flame. Prevent prolonged or repeated breathing of vapor or spray mist. OTHER PRECAUTIONS: Do not take internally. KEEP OUT OF REACH OF CHILDREN! rollow label directions. SECTION VIII -~ CONTROL MEASURES RESPIRATORY PROTECTION: I1f workplace exposure limit(s) of product or any component is exceeded ,a NIOSH approved, cartridge type respirator is advised in absence of proper enviromental control. VENTILATION LOCAL Local exhaust not adequate. MECHANICAL Mechanical exhaust sufficient to prevent exceeding listed TLV. PROTECTIVE GLOVES: Neoprene gloves

SECTION 2: Hazards identification

B or greater). EYE PROTECTION: Chemical splash goggles

HMIS CODES

H F PRODUCT CODE: M562-ALL NUMBERS 1208 M562A == SECTION I - MANUFACTURER IDENTIFICATION MANUFACTURER'S NAME: Mohawk Finishing Products, Inc. ADDRESS 4715 state Hwy 30 Amsterdam, New York 12010 GENERAL ID OIL FINISH EMERGENCY PHONE: 518-843-1380 DOT HAZARD CL. 518-843-1380 COMBUSTIBLE LIQ. INFORMATION CLASS CLASS 3 DATE PRINTE M SHIP. ID/PG.# UN 1263 PG.#26 SIGNATURE OF PREPARER SECTION II - HAZARDOUS INGREDIENTS/SARA III INFORMATION REPORTABLE COMPONENTS CAS NUMBER % OSHA PEL ACGIH/TLV MG/M3 MINERAL SPIRITS 64742-88-7 >1 100 PPM N/L No toxic chemical(s) subject to the reporting requirements of section 313 of Title IIT and of 40 CFR 372. = - PHYSICAL/CHEMICAL CHARACTERISTICS = BOILING PT. 318F/159C SPECIFIC GRAVITY (Approx.) 0.99 VAPOR PRES. 1 2.6 MM MELTING PT: N/A VAPOR DENSITY: >1.0 (AIR=1) EVAPORATION RATE: <1.0 (B. Acetate=l) SOLUBILITY IN WATER: Negligible. APPEARANCE AND ODOR: Colored paste, mild odor. == SECTION IV - FIRE AND EXPLOSION HAZARD DATA FLASHE PT. 108F/42C METHOD USED: TCC FLAMMABLE LIMITS IN AIR BY VOLUME- LOWER: 0.7% UPPER: 6.0% EXTINGUISHING MEDIA: Water spray, "alcohol" foam, dry chemical, foam, €02, or any class B extinguishing agent. SPECIAL FIREFIGHTING PROCEDURES: Wear self-contained breathing apparatus when fighting fires in confined space. If water is used, fog nozzles are preferred. UNUSUAL FIRE AND EXPLOSION HAZARDS: Vapors are heavier than air, may travel considerable-distance to a source of ignition and flashback. Use water fog to cool containers to prevent rupturing. SECTION V =~ REACTIVITY DATA STABILITY: Yes CONDITIONS TO AVOID: N/A. - INCOMPATIBILITY (MATERIALS TO AVOID): oxidizing materials can cause a vigorous reactionm. HAZARDOUS DECOMPOSITION OR BYPRODUCTS: Combustion will produce fumes, smoke, s carbon dioxide, and probably carbon monoxide. HAZARDOUS POLYMERIZATION: Will not occur. = SECTION VI - HEALTH HAZARD DATA HEALTH HAZARDS (ACUTE.AND CHRONIC): Barmful if inhaled, may affect the brain or nervous system, causing dizziness, headache or nausea. Causes nose, throat, eye and skin irritation. Reports have associated repeated and prolonged occupational over-exposure to solvents with permanent brain and nervous system damage. Intentional misuse by deliberately concentrating and inhaling the contents may be harmful or fatal. CARCINOGENICITY: No NTP CARCINOGEN: N/L. IARC MONOGRAPHS: N/L. OSHA REGULATED: N/L. SIGNS AND SYMPTOMS OF EXPOSURE: Breathing difficulty, light-headedness, dryness of respiratory tract. MEDICAL CONDITIONS GENERALLY AGGRAVATED BY EXPOSURE: Any medical condition, allergy, sensitization which may become worse upon exposure to the product.