FO 180 CST 1.19% SULFUR

Hazard statements (CLP)

H227, H332, H350, H361, H373

Code

Statements

H227

Combustible liquid

H332

Harmful if inhaled

H350

May cause cancer

H361

Suspected of damaging fertility or the unborn child

H373

May cause damage to organs through prolonged or repeated exposure

SECTION 2: Hazards identification

None as defined under 29 CFR 1910.1200 This material is hazardous according to regulatory guidelines (see (M)SDS Section 15).

2.1 Classification of the substance or mixture

Flammable liquid: Category 4. Acute inhalation toxicant Category 4. Carcinogen Category 1B. Reproductive toxicant (developmental) Category 2 Specific target organ toxicant (repeated exposure): Category 2. LABEL:

Signal word

Danger

Hazard statements

H227 Combustible liquid. H332 Harmful if inhaled. H350 May cause cancer. H361 Suspected of damaging the unborn child. H373: May cause damage to organs through prolonged or repeated exposure. Blood, Liver, Thymus

Precautionary statements

P201 Obtain special instructions before use. P202 Do not handle until all safety precautions have been read and understood. P210 Keep away from flames and hot surfaces. -- No smoking. P260 Do not breathe mist / vapours P271 Use only outdoors or in a well-ventilated area. P273 Avoid release to the environment. P280 Wear protective gloves/protective clothing/eye protection/face protection.P304 + P340 IF INHALED Remove person to fresh air and keep comfortable for breathing. P308 + P313 IF exposed or concerned Get medical advice/ attention. P312 Call a POISON CENTER or doctor/physician if you feel unwell. P370 + P378 In case of fire Use water fog, foam, dry chemical or carbon dioxide (CO2) to extinguish. P391: Collect spillage.P403 + P235: Store in a well-ventilated place. Keep cool. P405 Store locked up.P501 Dispose of contents and container in accordance with local regulations.

Contains

RESIDUAL FUEL OIL

2.3 Other hazards

None as defined under 29 CFR 1910.1200

Other physicochemical hazards

Thermal burn hazard - contact with hot material may cause thermal burns. Material can accumulate static charges which may cause an ignition. Material can release vapors that readily form flammable mixtures. Vapor accumulation could flash and/or explode if ignited.

Health hazards

High-pressure injection under skin may cause serious damage. Hydrogen sulfide, a highly toxic gas, may be present. Signs and symptoms of overexposure to hydrogen sulfide include respiratory and eye irritation, dizziness, nausea, coughing, a sensation of dryness and pain in the nose, and loss of consciousness. Odor does not provide a reliable indicator of the presence of hazardous levels in the atmosphere. May be irritating to the eyes, nose, throat, and lungs. Repeated exposure may cause skin dryness or cracking.

Environmental hazards

Expected to be very toxic to aquatic organisms. May cause long-term adverse effects in the aquatic environment. NFPA Hazard ID: Health: 2 Flammability: 2 Reactivity: 0 HMIS Hazard ID: Health: 2* Flammability: 2 Reactivity: 0 NOTE: This material should not be used for any other purpose than the intended use in Section 1 without expert advice. Health studies have shown that chemical exposure may cause potential human health risks which may vary from person to person.