General Information
Revision date
2025-08-14
Product name
G11 / FR5 Epoxy Glass
CAS No.
65997-17-3
1.2.1 Relevant identified uses
Electrical insulation, structural panels, mechanical supports, and high-voltage barriers in switchboards, transformers, and industrial electrical
Icons in SDS
Company Information
company name
MISCO Australia
e-mail address of the competent person responsible for the Safety Data Sheet
info@misco.net.au, info@misco.net.au
GHS Information
Signal word
Warning
Hazard Codes
Hazard statements (CLP)
H315, H319, H335
Hazard statements
Code
Statements
H315
Causes skin irritation
Section 2
SECTION 2: Hazards identification
Classification (GHS – Safe Work Australia) This product is not classified as hazardous under the Globally Harmonised System (GHS) criteria by Safe Work Australia when in solid form Hazard Classification (Machining Dust) When machined, drilled, or sanded, airborne dust may cause mechanical irritation to the eyes, skin, and respiratory system Eye Irritation – Category 2A (dust only) Skin Irritation – Category 2 (dust only) Specific Target Organ Toxicity (Single Exposure) – Category 3 (respiratory irritation, dust only)
2.2 Label elements
Elements (applicable during machining exposure) •
Hazard statements
• H315: Causes skin irritation (dust). • H319: Causes serious eye irritation (dust). • H335: May cause respiratory irritation (dust).
Precautionary statements
• P261: Avoid breathing dust. • P280: Wear protective gloves, clothing, and eye/face protection. • P264: Wash hands thoroughly after handling. • P271: Use only outdoors or in well-ventilated areas. • P304 + P340: If inhaled, remove person to fresh air and keep comfortable for breathing. • P305 + P351 + P338: If in eyes, rinse cautiously with water for several minutes.
2.3 Other hazards
• Not flammable in solid form; however, decomposition at high temperatures may release carbon monoxide, carbon dioxide, and phenolic vapours. • Contains fibreglass, which may cause temporary itching or irritation during handling or machining.
2.1 Classification of the substance or mixture
This product is not classified as hazardous under the Globally Harmonised System (GHS) criteria by Safe Work Australia when in solid form. Hazard Classification (Machining Dust): When machined, drilled, or sanded, airborne dust may cause mechanical irritation to the eyes, skin, and respiratory system. • Eye Irritation – Category 2A (dust only) • Skin Irritation – Category 2 (dust only) • Specific Target Organ Toxicity (Single Exposure) – Category 3 (respiratory irritation, dust only)
