Wirelock: Booster Kit

Hazard statements (CLP)

H317, H319, H400, H410

Code

Statements

H317

May cause an allergic skin reaction

SECTION 2: Hazards identification

According to Regulation (EC) No. 1272/2008 (CLP) Classification of the substance or mixture

Hazard pictograms

GHS07 GHS09

Signal word

WARNING

Product definition

Booster Kit. Contains dibenzoyl peroxide.

Hazard statements

H317 - May cause an allergic skin reaction. H319 - Causes serious eye irritation. H410 - Very toxic to aquatic life with long-lasting effects.

Precautionary statements

P261 - Avoid breathing dust/fume/gas/mist/vapours/spray. P280 - Wear protective gloves/protective clothing/eye protection/face protection. P302+P352 - IF ON SKIN: Wash with plenty of water. P333+P313 - If skin irritation or rash occurs: Get medical advice/attention. P305+P351+P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337+P313 - If eye irritation persists: Get medical advice/attention. P362+P364 - Take off contaminated clothing and wash it before reuse. P273 - Avoid release to the environment. P391 - Collect spillage.

Other hazards which do not result in classification

This mixture contains no components considered to be persistent, bioaccumulative and toxic (PBT), very persistent and very bioaccumulative (vPvB) or identified as having endocrine disrupting properties at levels of 0.1% or higher. This product contains an inert coarse sand which is not hazardous to health or the environment. The sand does not contain any respirable crystalline silica which is hazardous to human health. Respirable crystalline silica (quartz) may be generated if the product is ground, abraded or otherwise processed. In its undiluted state (100%), dibenzoyl peroxide is classified as Organic Peroxides, Type B (may undergo a thermal explosion in packaging). The dibenzoyl peroxide concentration in the Wirelock Booster kit is 15 - 25%, thus the mixture is much more stable and downgraded to a Type G classification. This has been determined by our manufacturer experimentally, though no test data has been given. A polymerisation reaction occurs when the resin system (Part A) is combined with the catalyst / hardener (Part B) / Booster Kit which has the potential to generate significant heat. The product has a powerful bonding action on end use. Users should take appropriate precautions. Only use Wirelock Booster kits that match the size of the Wirelock kit being used. Always add the Booster kit to the Wirelock powder first and then add the resin. Risk of dust explosion.

2.1 Classification of the substance or mixture

Classification according to Regulation (EC) No. 1272/2008 (CLP) Organic peroxides, Type G - Skin sensitisation, Category 1 H317 Serious eye damage/eye irritation, Category 2 H319 Hazardous to the aquatic environment - Acute Hazard, Category 1 H400 Hazardous to the aquatic environment - Chronic Hazard, Category 1 H410 For the full text of H statements, see section 16.