Note: Ingredients listed on restricted chemical lists
EC/CAS
231-072-3/7429-90-5
Name of the chemical
Aluminium
Concentration
N/A
EC/CAS
231-175-3/7439-96-5
Name of the chemical
Manganese
Concentration
213-105- 7440-90-
EC/CAS
215-171-9/1309-48-4
Name of the chemical
magnesium oxide
Concentration
N/A
EC/CAS
215-691-6/1344-28-1
Name of the chemical
aluminium oxide
Concentration
N/A
EC/CAS
231-159-6/7440-50-8
Name of the chemical
Copper
Concentration
N/A
EC/CAS
231-157-5/7440-47-3
Name of the chemical
Chromium; chromic acid and its salts
Concentration
N/A
EC/CAS
215-222-5/1314-13-2
Name of the chemical
Zinc oxide; C.I. 77947
Concentration
N/A
EC/CAS
231-176-9/7440-67-7
Name of the chemical
Zirconium and its compounds, with the exception of the substances listed under reference number 50 in Annex III, and the zirconium lakes, pigments or salts of the colouring agents when listed in Annex IV
Concentration
N/A
General Information
Version
1.0
Revision date
2023-04-13
Product name
Welding filler metals
1.2.1 Relevant identified uses
Thermal spray coating, vapour coating, welding, punching, rolling, forming, polishing, grinding, stripping, etching, glazing, anodizing
Emergency telephone
+49 9951 69059-3110
Icons in SDS
Company Information
company name
MIGAL.CO GmbH
e-mail address of the competent person responsible for the Safety Data Sheet
Robert.lahnsteiner@migal.co, info@migal.co
Section 2
SECTION 2: Hazards identification
2.1 Classification of the substance or mixture
No labelling requirement according to EC criteria Other informations pertaining to special dangers for human and environment Main hazards: Ø If molten aluminium comes into contact with water or certain chemicals, in particular oxygen-rich chemicals, then a risk of splashing, explosion or fire exists. Ø There is a risk of explosion, fire or splashing if fine aluminium particles, aluminium powder or aluminium turnings are produced and released while working. Ø There is a risk of burns upon contact with hot or molten metal. Ø There is a risk of abrasions and cuts upon contact with sharp edges of turnings, wire pieces, drawn wires, bars etc. Ø There is a risk of eye injury during any kind of work that involves the production and release of fine aluminium particles, aluminium powder or aluminium turnings. Ø There is a particular risk when welding aluminium products (see Chapter 8). Ø There is a risk of electric shock when touched, since aluminium is a metal, and therefore a good electrical conductor. Ø There are risks associated with the release of hydrogen, among other things during surface treatment in chemical and electrochemical processes (etching, glazing, anodizing etc.). Ø There are risks when handling and storing large, heavy wire coils as well as bars and rods. Specific hazards: None
