Note: Ingredients listed on restricted chemical lists
EC/CAS
25068-38-6
Name of the chemical
4,4'-Isopropylidenediphenol, oligomeric reaction products with 1-chloro-2,3-epoxypropane
Concentration
N/A
EC/CAS
1333-86-4
Name of the chemical
carbon black
Concentration
N/A
EC/CAS
215-609-9
Name of the chemical
Carbon black
Concentration
N/A
General Information
Revision date
2018-12-10
Product name
CBF-100 Conductive Body Filler
1.2.1 Relevant identified uses
professional use
1.2.2. Uses advised against
known
Emergency telephone
+1 (810) 602-0394
Icons in SDS
Company Information
company name
Midwest Thermal Spray
e-mail address of the competent person responsible for the Safety Data Sheet
ds@midwestthermal.com
GHS Information
Signal word
Warning
Hazard Codes
Hazard statements (CLP)
H315, H317, H319, H411
Hazard statements
Code
Statements
H315
Causes skin irritation
Section 2
2.1 Classification of the substance or mixture
Black paste. Slight odour.
Most important adverse effects
Irritating to eyes and skin. May cause an allergic skin reaction. Occupational exposure to the substance or mixture may cause adverse effects. For further information, please refer to section 11 of the SDS. Toxic to aquatic life with long lasting effects. Avoid release to the environment. See Section 12 for more environmental information. This mixture is classified as hazardous in accordance with Regulation (EC) No 1272/2008. Classification: Skin irritation - Category 2; H315 Eye damage/irritation - Category 2 ;H319 Skin sensitization - Category 1; H317 Chronic aquatic hazard - Category 2; H411
Hazardous Ingredients
Epoxy resin (number average molecular weight ≤ 700); p-tert-butylphenyl 1-(2,3-epoxy)propyl ether; Epichlorohydrin Polyglycol Resin Polymer.
Signal word
Warning!
Hazard statements
H315 - Causes skin irritation. H317 - May cause an allergic skin reaction. H319 - Causes serious eye irritation. H411 - Toxic to aquatic life with long lasting effects.
Precautionary statements
P272 - Contaminated work clothing should not be allowed out of the workplace. P273 - Avoid release to the environment. P280 - Wear protective gloves and eye/face protection. P333 + P313 - If skin irritation or rash occurs: Get medical advice/attention. P362 + P364 - Take off contaminated clothing and wash it before reuse. P337 + P313 - If eye irritation persists: get medical advice/attention. P391 - Collect spillage. P501 - Dispose of contents/container in accordance with local regulation.
Other hazards which do not result in classification
Burning produces obnoxious and toxic fumes. Reacts with air to form peroxides. Rate of peroxide formation is not known. Excessive heating above 50°C / 122°F may degrade the resin component. If product is heated or mists are formed, inhalation may cause irritation to the nose, throat and respiratory tract. May cause an allergic respiratory reaction (e.g. asthma) in some hypersensitive individuals. Ingestion may cause gastrointestinal irritation, nausea, vomiting and diarrhea. PBT assessment: This mixture contains no substance(s) above reportable levels which are considered to be persistent, bioaccumulating nor toxic (PBT), or very persistent and very bioaccumulating (vPvB).
