Note: Ingredients listed on restricted chemical lists
EC/CAS
68476-34-6
Name of the chemical
Fuels, diesel, no. 2
Concentration
N/A
General Information
Revision date
2018-11-26
Product name
MC-30, MC-70, MC-250, MC-800, MC-3000, SCM, permacoat, MC250A, MC3000A
1.2.1 Relevant identified uses
Construction Material/road surfacing
Icons in SDS
Company Information
company name
Michigan Paving & Materials
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H304, H316, H319, H332, H335, H351
Hazard statements
Code
Statements
H304
May be fatal if swallowed and enters airways
H316
Causes mild skin irritation
H319
Causes serious eye irritation
H332
Harmful if inhaled
H335
May cause respiratory irritation
H351
Suspected of causing cancer
Section 2
Classification according to GHS
Flammable Liquids – Category 3 Skin Corrosion Irritation – Category 2 Serious Eye Damage / Eye Irritation – Category 2B Carcinogenicity – Category 1B Acute Aquatic Toxicity – Category 2
Signal word
WARNING!
Hazard statements
Flammable Liquid and vapor H351 - Suspected of causing cancer.. May release toxic hydrogen sulfide gas that could accumulate at toxic concentrations inside containers of heated asphalt H304 May be fatal if swallowed and enters airways. H319: Causes serious eye irritation H332: Harmful if inhaled H335: May cause respiratory irritation H316 Causes mild skin irritation. Harmful to aquatic life .
Precautionary statements
Blended asphalt products are molten when heated above 200 0F and heated material may cause thermal burns. The cured, inert semi solid material is considered non hazardous. P201 - Obtain special instructions before use. P202 - Do not handle until all safety precautions have been read and understood. P260: Do not breathe dust/fume/gas/mist/vapors/spray P264: Wash hands thoroughly after handling P271: Use only in well-ventilated area. P210 Keep away from heat/sparks/open flames/hot surfaces. No smoking. P233 Keep container tightly closed. P240 Ground/bond container and receiving equipment. P241 Use explosion-proof electrical/ventilating/lighting equipment. P242 Use only non-sparking tools. P243 Take precautionary measures against static discharge. P262 Do not get in eyes, on skin, or on clothing. P280 Wear protective gloves/protective clothing/eye protection/face protection. Avoid release to the environment
Prevention
Obtain special instructions before use. Do no handle until all safety precautions have been read and understood. Wash hands and any contacted skin thoroughly after handling. Wear protective gloves of materials such as leather or thick rubber, and long sleeved clothing. Wear safety eye glasses with side shields, and if needed to prevent splattering onto face, wear face shield.
Response
If exposed or concerned: Get medical advice or attention. If on skin: Wash with plenty of water and hand cleaner. . If skin irritation occurs: Get medical attention. Take off contaminated clothing and wash it before reuse. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing. If eye irritation persists: Get medical attention.
Storage
Store locked up.
Disposal
Dispose of contents/containers in accordance with local, state and national regulations. Hazard(s) not otherwise classified (HNOC): Hot Liquid May Cause Thermal Burns May Release Hydrogen Sulfide Gas