Note: Ingredients listed on restricted chemical lists
EC/CAS
84852-53-9
Name of the chemical
1,1'-(ethane-1,2-diyl)bis[pentabromobenzene]
Concentration
16-18%
EC/CAS
1309-64-4
Name of the chemical
Diantimontrioxid
Concentration
7%
EC/CAS
8052-41-3
Name of the chemical
Stoddard Solvent; Naphtha (petroleum), hydrodesulfurized heavy
Concentration
1%
EC/CAS
64741-65-7
Name of the chemical
Petroleum, coal, tar and natural gas and their derivatives generated using distillation and/or other processing methods if they contain ≥ 0,1 % w/w benzene
Concentration
1%
EC/CAS
1333-86-4
Name of the chemical
carbon black
Concentration
1%
General Information
Revision date
2013-12-16
Product name
Flame Retardant Epoxy Encapsulating and Potting Compound
1.2.1 Relevant identified uses
Hardeners for use with epoxy resin to pot devices or encapsulate components
1.2.2. Uses advised against
Not for use as a spray coating
Manufacturer Name
MG Chemicals
Icons in SDS
Company Information
company name
MG Chemicals
e-mail address of the competent person responsible for the Safety Data Sheet
support@mgchemicals.com, info@mgchemicals.com, sds@mgchemicals.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H312, H314, H317, H351, H412
Hazard statements
Code
Statements
H312
Harmful in contact with skin
Section 2
WHMIS Classification
E – Corrosive; D1B Immediately Toxic (Skin Absorption); D2A – Very Toxic Material (Carcinogen IARC Class 2B); D2B – Toxic Material (Skin Sensitization in Humans) Note: The possible carcinogenicity warning applies to inhalable dust. Aerosolization and misting should be avoided and are not expected to occur for normal uses.
Signal word
WARNING GHS Categories Criteria Category Pictograms Serious Eye Damage 1B Danger Skin Corrosion 1 Danger Sensitization Skin sensitizer 1 Warning Acute Toxicity Dermal 4 Warning Carcinogenicity 2 Warning DANGER
Environmental hazards
Acute Aqua. Tox. 2 — No Symbol Chronic Aqua. Tox. 3 — Mandated Continued on the next page
HMIS® ratings
NFPA® 704 CODES HEALTH: 3 FLAMMABILITY: 1
Physical hazards
0 3 0 PERSONAL PROTECTION: Approximate HMIS and NFPA Risk Ratings Legend: 0 (Low or none); 1 (Slight); 2 (Moderate); 3 (Serious); 4 (Severe)
Hazard statements
H314: Causes severe skin burns and eye damage H312: Harmful in contact with skin H317: May cause an allergic skin reaction H351: Suspected of causing cancer H412: Harmful to aquatic life with long lasting effects
Precautionary statements
P102: Keep out of reach of children. P260 + P271: Do not breathe fume/gas/vapors/spray. Use only outdoors or in well ventilated area. P280: Wear protective gloves/eye protection P305 + P351 + P358 IF IN EYES Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P302 + P352 + P361 + P353 IF ON SKIN Wash with plenty of water Take off immediately all contaminated clothing. Wash contaminated clothing before reuse. P310: Immediately call a POISON CENTER or doctor
2.3 Other hazards
Not applicable Exposure Routes and Symptoms Summary Eyes Causes severe eye damage or irritation. Also cause eye redness or pain. Skin Cause serious severe skin irritation or burns. May cause allergic skin reactions. Triethylenetetramine can be absorbed through skin leading to toxic effects. Inhalation Inhalation of vapors or mist may cause irritation to the nose, throat and lungs (upper respiratory tract). When heated, hot triethylenetetramine vapors may cause itching of the face, skin redness (erythema) and swelling (edema). Ingestion May cause severe irritation or corrosive burns to the mouth, throat, esophagus, and stomach. May cause allergic reactions. Chronic Prolonged or repeated exposure to the uncured epoxy hardener may cause sensitization (allergies). Long term inhalation exposure to carbon black or antimony trioxide dust may cause cancer.
