Note: Ingredients listed on restricted chemical lists
EC/CAS
7440-22-4
Name of the chemical
Silver
Concentration
46%
EC/CAS
14807-96-6
Name of the chemical
Talc
Concentration
2%
EC/CAS
123-86-4
Name of the chemical
acetic acid, butyl ester
Concentration
0.3%
General Information
Revision date
2023-10-03
Product name
842ER-A
1.2.1 Relevant identified uses
Silver conductive epoxy resin
Manufacturer Name
MG Chemicals
Emergency telephone
+1-866-519-4752, +1-760-476-3962, +1-613-996-6666
Icons in SDS
Company Information
company name
MG Chemicals
e-mail address of the competent person responsible for the Safety Data Sheet
support@mgchemicals.com, sds@mgchemicals.com
GHS Information
Signal word
DANGER
Hazard Codes
Hazard statements (CLP)
H315, H317, H318, H336, H410
Hazard statements
Code
Statements
H315
Causes skin irritation
Section 2
SECTION 2: Hazards identification
Classification of Hazardous Chemical GHS Categories Criteria Flammable liquid Serious Eye Damage Category Signal Word Pictograms Danger Flame Danger Corrosion Sensitization Skin 1 Warning Exclamation Skin Irritation 2 Warning Exclamation Specific Target Organ Toxicity Single Exposure 3 Warning Exclamation Hazardous to the Aquatic Environment Chronic 1 Warning Environment Note: The degree of severity is ranked within each hazard class from 1 (Highest Severity) to up to 5 (Lowest Severity), which is opposite to HMIS and NFPA conventions. Severity category rankings do not allow comparisons between classes
Signal word
DANGER
Hazard statements
H225: Highly flammable liquid and vapor H318: Causes serious eye damage H317: May cause an allergic skin reaction H315: Causes skin irritation H336: May cause dizziness or drowsiness Section continued on the next page Continued… H410: Very toxic to aquatic life with long lasting effects
Precautionary statements
P102 Keep out of reach of children. P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P233 Keep container tightly closed. P240 Ground and bond container and receiving equipment. P241 Use explosion-proof equipment. P243 Take action to prevent static discharges. P261 Avoid breathing mist, vapors, and spray. P264 Wash hands thoroughly after handling. P280 Wear protective gloves and eye protection. P272 Contaminated work clothing should not be allowed out of the workplace. P271 Use only outdoors or in a well-ventilated area. P273 Avoid release to the environment. P370 + P378 In case of fire: Use dry chemical, carbon dioxide, chemical foam, or water spray to extinguish. P303 + P361 + IF ON SKIN (or hair): Take off immediately all contaminated clothing. P352 Wash with plenty of water or shower. P333 + P313 If skin irritation or rash occurs: Get medical advice or attention. P363 Wash contaminated clothing before reuse. P305 + P351 + P338, P310 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER or doctor. P304 + P340, IF INHALED: Remove person to fresh air and keep comfortable for P319 breathing. Get medical help if you feel unwell. P391 Collect spillage. Section continued on the next page Continued… P403 + P235 Store in a well-ventilated place. Keep cool. P405 Store locked up. P501 Dispose of contents in accordance to local, regional, national, and international regulations.
2.3 Other hazards
Other Criteria Hazard Statements/Precautionary Signal Pictograms Statement Word Defats skin Repeated exposure may cause skin None None dryness or cracking. Argyria Long term exposure to silver powder or None None compounds can lead to an irreversible blue-grey discoloration of the skin.
2.1 Classification of the substance or mixture
GHS Categories Criteria Category Signal Word Pictograms Flammable liquid 2 Danger Flame Serious Eye Damage 1 Danger Corrosion Sensitization Skin 1 Warning Exclamation Skin Irritation 2 Warning Exclamation Specific Target Organ Toxicity Single Exposure 3 Warning Exclamation Hazardous to the Aquatic Environment Chronic 1 Warning Environment Note: The degree of severity is ranked within each hazard class from 1 (Highest Severity) to up to 5 (Lowest Severity), which is opposite to HMIS and NFPA conventions. Severity category rankings do not allow comparisons between classes.