Note: Ingredients listed on restricted chemical lists
EC/CAS
238-878-4/14808-60-7
Name of the chemical
Silica, crystalline
Concentration
≥25-≤50 ≤10
EC/CAS
204-658-1/123-86-4
Name of the chemical
acetic acid, butyl ester
Concentration
≤10
EC/CAS
265-185-4/64742-82-1
Name of the chemical
Naphtha (petroleum), hydrodesulfurized heavy
Concentration
≤0.48
General Information
Version
8.05
Revision date
2022-06-22
Product name
ACROLON 218 HS Polyurethane - Gloss (Part A) - Ultradeep/Clear Tint Base
1.2.1 Relevant identified uses
Paint or paint related material
1.2.2. Uses advised against
Industrial use only
Icons in SDS
Company Information
company name
Mfg. in U.S.A and exported by
e-mail address of the competent person responsible for the Safety Data Sheet
sds@sherwin.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H225, H336, H351, H372, H412
Hazard statements
Code
Statements
H225
Highly flammable liquid and vapour
H336
May cause drowsiness or dizziness
H351
Suspected of causing cancer
H372
Causes damage to organs through prolonged or repeated exposure
H412
Harmful to aquatic life with long lasting effects
Section 2
SECTION 2: Hazards identification
1272/2008] Classification of the substance or mixture
Product definition
Mixture
Signal word
Danger
Hazard statements
Highly flammable liquid and vapor. May cause drowsiness or dizziness. Suspected of causing cancer. Causes damage to organs through prolonged or repeated exposure. Harmful to aquatic life with long lasting effects.
Prevention
Obtain special instructions before use. Wear protective gloves, protective clothing, eye protection, face protection, or hearing protection. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Avoid release to the environment. Do not breathe vapor. Do not eat, drink or smoke when using this product.
Response
Not applicable.
Storage
Not applicable.
Disposal
Not applicable.
Hazardous Ingredients
Crystalline Silica, respirable powder n-Butyl Acetate 2-methoxy-1-methylethyl acetate Methyl Ethyl Ketone Heavy Aromatic Naphtha
Contains
bis(1,2,2,6,6-pentamethyl-4-piperidyl) sebacate, UV Light Absorber and Benzotriazole Hydroxyphenyl Polymer. May produce an allergic reaction. FOR INDUSTRIAL USE ONLY
Special packaging requirements
Not applicable.
2.3 Other hazards
This mixture does not contain any substances that are assessed to be a PBT or a vPvB.
Other hazards which do not result in classification
None known.
2.1 Classification of the substance or mixture
Product definition : Mixture Classification according to Regulation (EC) No. 1272/2008 [CLP/GHS] Flam. Liq. 2, H225 Carc. 2, H351 STOT SE 3, H336 STOT RE 1, H372 Aquatic Chronic 3, H412 The product is classified as hazardous according to Regulation (EC) 1272/2008 as amended. See Section 16 for the full text of the H statements declared above. See Section 11 for more detailed information on health effects and symptoms.