General Information
Revision date
2016-04-01
Product name
PRIMEDIC™ AkuPak LITE – For use with PRIMEDIC™ HeartSave (M250) series / DefiMonitor (M290) series
Icons in SDS
Company Information
company name
METRAX GmbH
Section 2
SECTION 2: Hazards identification
Regulation (EC) No. 1272/2008 Preparation Hazards and Classification: Not classified as dangerous or hazardous with normal use. The cell should not be opened or burned. Exposure to the ingredients contained within or their combustion products could be harmful. European Communities (EC): This product is not classified as hazardous ac-
Appearance/Odor
Solid object with no odor.
Principle Routes of Exposure
These chemicals are contained in a sealed enclosure. Risk of exposure occurs only if the cell is mechanically, thermally or electrically abused to the point of compromising the enclosure. If this occurs, exposure to the electrolyte solu- tion contained within can occur by Inhalation, Ingestion, Eye contact and Skin contact.
Potential health effects
ACUTE (short term): see Section 8 for exposure controls In the event that this cell has been ruptured, the electrolyte solution contained within the cell would be corrosive and can cause burns to skin and eyes. Inhalation: Inhalation of materials from a sealed cell is not an expected route of exposure. Vapors or mists from a ruptured cell may cause respiratory irritation. Ingestion: Swallowing of materials from a sealed cell is not an expected route of exposure. Swallowing the contents of an open cell can cause serious chemical burns of mouth, esophagus, and gastrointestinal tract. Skin: Contact between the cell and skin will not cause any harm. Skin contact with contents of an open cell can cause severe irritation or burns to the skin. Eye: Contact between the cell and the eye will not cause any harm. Eye contact with contents of an open cell can cause severe irritation or burns to the eye.
Long term hazards
see Section 11 for additional toxicological data Not applicable
Medical Conditions Generally Aggravated by Exposure
Not available
Interactions with other chemicals
Immersion in high conductivity liquids may cause corrosion and breaching of the cell enclosure.
Environmental effects
Not available