General Information
Revision date
2008-02-01
Product name
mepBLITz Coolant
1.2.1 Relevant identified uses
Circulating Coolant in mepBLITz Electropolishing
Icons in SDS
Company Information
company name
Metal Science Technologies Pty Ltd
Section 2
SECTION 2: Hazards identification
Product Name: mepBLITz Coolant Classified as hazardous according to criteria of NOHSC Classified as Non Dangerous goods according to ADG code Proper Shipping Name Ethylene glycol 60% to 90%,denatonium benzoate <1%, corrosion inhibitors <9% ,antifoam <1% Packing Group Labels Required: COMBUSTIBLE LIQUID, regulated under AS1940 for Bulk Storage purposes only. NOT REGULATED FOR TRANSPORT OF DANGEROUS GOODS:UN, IATA,IMDG Hazchem Code NONE Poisons Schedule S5 Uses: Engine coolant. Anti-boil, anti-freeze, anti-corrosion RISK SAFETY Harmful if swallowed. HARMFUL - May cause lung damage if swallowed Wear suitable protective clothing. To clean the floor and all objects contaminated by this material use water and detergent. Keep away from food drink and animal feeding stuffs. If swallowed IMMEDIATELY contact Doctor First Aid SWALLOWED · If swallowed do NOT induce vomiting. · If vomiting occurs, lean patient forward or place on left side (head-down position, if possible) to maintain open airway and prevent aspiration. · Observe the patient carefully. · Never give liquid to a person showing signs of being sleepy or with reduced awareness i.e. becoming unconscious. · Give water to rinse out mouth, then provide liquid slowly and as much as casualty can comfortably drink. · Seek medical advice. Avoid giving milk or oils. Avoid giving alcohol. · If spontaneous vomiting appears imminent or occurs, hold patient's head down, lower than their hips to help avoid possible aspiration of vomitus. For advice, contact a Poisons Information Centre or a doctor. Phone 13 1126 from anywhere in Australia EYE · If in eyes, hold eyelids apart and flush the eye continuously with running water. · Continue flushing until advised to stop by the Poisons Information Centre or a doctor or for at least 15 minutes. · Ensure complete irrigation of the eye by keeping eyelids apart and away from eye and moving the eyelids by occasionally lifting the upper and lower lids. · If pain persists or recurs seek medical attention. · Removal of contact lenses after an eye injury should only be undertaken by skilled personnel. SKIN If skin contact occurs: · Immediately remove all contaminated clothing, including footwear. · Flush skin and hair with running water (and soap if available). · Seek medical attention in event of irritation. INHALED · If fumes or combustion products are inhaled remove from contaminated area. · Lay patient down. Keep warm and rested. · Prostheses such as false teeth, which may block airway, should be removed, where possible, prior to initiating first aid procedures. · Apply artificial respiration if not breathing, preferably with a demand valve resuscitator, bag-valve mask device, or pocket mask as trained. Perform CPR if necessary. · Transport to hospital, or doctor.