Note: Ingredients listed on restricted chemical lists
EC/CAS
80-62-6
Name of the chemical
methacrylic acid, methyl ester
Concentration
N/A
EC/CAS
99-97-8
Name of the chemical
N,N-dimethyl-p-toluidine
Concentration
N/A
EC/CAS
202-805-4
Name of the chemical
N,N-Dimethyl-p-toluidin
Concentration
N/A
General Information
Revision date
2015-06-26
Product name
Spectrum UltraPrime MMA Concrete Primer
1.2.1 Relevant identified uses
Binder for floor-coating
supplier name
Meon Ltd
Emergency telephone
+44 (0) 808 118 1922
Icons in SDS
Company Information
company name
Meon Ltd
e-mail address of the competent person responsible for the Safety Data Sheet
mail@meonuk.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H225, H302, H305, H315, H317, H335
Hazard statements
Code
Statements
H225
Highly Flammable liquid and vapour
Section 2
2.1 Classification of the substance or mixture
Classification according to Flammable liquids, category 1(H225), Acute toxicity (oral), category 4(H305), Regulation Caustic burning/irritation of skin, category 2(H315), Skin sensitisation, (EC) No. 1272/2008 category 1 B(H317), Specific Target Organ Toxicity – Single exposure, category 3(H335) Classification according to Highly flammable. Directive Irritating to respiratory system and skin.
67/548/EEC
1999/45/EC May cause sensitisation by skin contact.
Hazard pictograms
GHS02: Flame GHS07: Exclamation mark 1 |17
Signal word
Danger
Hazard statements
Highly flammable liquid and vapour. (H225) Harmful if swallowed. (H302) Causes skin irritation. (H315) May cause an allergic skin reaction. (H317) May cause respiratory irritation. (H335)
Precautionary statements
Wear protective gloves/protective clothing/eye protection. (P280) Call a POISON CENTER/doctor if you feel unwell. (P312) Dispose of contents/container in accordance with local regulation. (P501)
Response
IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. (P303 + P361 + P353)
Storage
Store in a well-ventilated place. Keep cool. (P403 + P235)
Hazardous Ingredients
Contains methyl methacrylate, N,N-bis-(2-hydroxypropyl)-p-toluidine, triethyleneglycol dimethacrylate.
Further information
Electrostatic charge. The product is normally supplied in a stabilized form. If the permissible storage period and/or storage temperature is exceeded, the product may polymerize with heat evolution.
