Note: Ingredients listed on restricted chemical lists
EC/CAS
7758-99-8
Name of the chemical
Copper sulphate pentahydrate
Concentration
N/A
EC/CAS
14808-60-7
Name of the chemical
Silica, crystalline
Concentration
N/A
General Information
Revision date
2015-09-02
Product name
Powder Soot Remover
1.2.1 Relevant identified uses
Powder Soot Remover
Icons in SDS
Company Information
company name
MEECO MFG CO INC
Section 2
2.1 Classification of the substance or mixture
Carcinogenicity, Category 2 Skin irritation, Category 3 Eye irritation, Category 2 Target organ toxicity (repeated), Category 1
Hazard pictograms
Health Hazard
Hazard statements
Suspected of causing cancer
Precautionary statements
Excessive inhalation of dust will increase the risk of silcosis. Some medical studies have concluded that there is sufficient evidence in humans for the carcinogenicity of inhaled crystalline silica in the form of quartz or cristobalite from occupational sources. Avoid prolonged exposure to dust. Provide adequate ventilation and use suitable respirators if dust conditions warrant. 3. COMPOSITION/HAZARDOUS INGREDIENTS Ingredient: CAS # Percent Exposure Limits Fixed Carbon 7440-04-40 15 - 30 OSHA PEL = 10mg/m3 ACGIH TLV = 15mg/m3 Soda Bicarbonate 144-55-8 15 - 30 OSHA PEL = 15mg/m3 (Total Dust) ACGIH TLV = Not Developed Copper Chloride 7758-99-8 5 - 20 OSHA PEL = 1mg/m3 ACGIH TLV = 1mg/m3 Bentonite Clay 1302-78-9 5 - 20 OSHA PEL = 5mg/m3 ACGIH TLV = 10mg/m3 Silicon Dioxide 14808-60-7 35 - 50 OSHA PEL = .05mg/m3 ACGIH TLV = .05mg/m3
