Note: Ingredients listed on restricted chemical lists
EC/CAS
67-56-1
Name of the chemical
Methanol
Concentration
1.7%
General Information
Revision date
2016-02-16
Product name
2807A & 2807-05
Icons in SDS
Company Information
company name
Medical Chemical Corp
Section 2
SECTION 2: Hazards identification
NFPA Rating Danger: Highly flammable liquid and vapor. Keep away from heat, sparks, open flames and hot surfaces. No smoking. Keep container tightly closed. Use only non-sparking tools. Take precautions against static discharge. Wear protective clothes and eye protection. In case of skin contact immediately remove all contaminated clothing. Rinse with water or shower. In case of fire, use fire extinguishers approved for alcohol fires. Safety Ratings Health Hazardous Flammability Highly flammable liquid and vapor Reactivity Slight Contact Slight Recommended safety equipment: safety goggles, lab coat and proper gloves
Storage
Keep cool, away from sources of ignition in a well ventilated area
NFPA Ratings
Health = 2 Flammability = 3 Reactivity = 1
Potential health effects
The toxicology of this compound have not been completely examined. It is presumed that the toxicity of this item is similar to that of other zinc compounds. Inhalation: Alcohols are absorbed through the mucous membranes and can produce irritation as well as the same effects as ingestion. Ingestion: Inhalation can produce CNS disturbance, dizziness, photophobia, etc. Skin contact: Alcohols are absorbed through the skin. Chronic contact with alcohols causes defatting of the skin with resultant irritation and flaking. Chronic contact with zinc sulfate can cause systemic poisoning. Eye contact: Irritating and corrosive. Chronic Exposure: Unknown. Aggravation of preexisting conditions: Impaired kidney and liver function may be aggravated by exposure to alcohols and/ or zinc sulfate. Preexisting eye, skin, and respiratory conditions may also be aggravated. Methanol has shown genetic toxicity in some animals. Section III - Composition/Information on Hazardous Components Ingredients CAS# OSHA Pel ACGIH TLV Other Limits % Acetic acid 64-19-7 25 mg/m3 (TWA) 1% v/v Ethanol 64-17-5 1000 ppm (TWA) 30% v/v Isopropanol 67-63-0 400 ppm (TWA) 1.7% v/v Methyl alcohol 67-56-1 200 ppm (TWA) 1.7% v/v Zinc sulfate 7733-02-0 Not applicable 5% w/v