Note: Ingredients listed on restricted chemical lists
EC/CAS
7440-22-4
Name of the chemical
Silver
Concentration
-
General Information
Revision date
2022-06-24
Product name
ABV TPU
Substance name
AND
Product Synonyms
ABV TPU Antimicrobial effect, Filament 1.75mm/450gr; ABV TPU Antimicrobial effect, Pellets 650 gr; ABV TPU Antimicrobial effect, pellets 3 Kg;
REACH No
is
1.2.1 Relevant identified uses
For medical/healthcare applications, transportation, dentistry, medical devices or packaging
1.2.2. Uses advised against
Implantable Medical Devices
Emergency telephone
34 91 562 04 20
Icons in SDS
Company Information
company name
MD Graphene SL
e-mail address of the competent person responsible for the Safety Data Sheet
reg@medphen.com
GHS Information
Signal word
Hot and/or melted polymer can severely burn the skin – handle with care
Section 2
SECTION 2: Hazards identification
2.1 Classification of the substance or mixture
Classification according to EC Regulation
2.2 Label elements
Labelling according to EC Regulation
2.3 Other hazards
The melted product can cause severe burns.
Signal word
Hot and/or melted polymer can severely burn the skin – handle with care. Work only in a well-ventilated area, the processing fumes may cause eye and respiratory tract irritation and in severe cases nausea and headache. Keep away from fire and open sources of ignition. Never burn filament, toxic gasses and vapors will be generated in the fire. If exposed to fumes from overheating leave contaminated area and breathe fresh air, seek medical advice.
Precautionary statements
P202 Do not handle until all safety precautions have been read and understood. P261 Avoid breathing dust/ fume/ gas/ mist/ vapors/ spray. P264 Wash skin thoroughly after handling. P273 Avoid release to the environment. P304 + P340 + P312 IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER/doctor if you feel unwell. P337 + P313 If eye irritation persists: Get medical advice/ attention. P402+404 Store in a dry place. Store in a closed container. P403 + P233 Store in a well-ventilated place. Keep container tightly closed. P405 Store locked up. P501 Dispose of contents/ container to an approved waste disposal plant. Note: The components of this product are embedded in a polymer matrix and are therefore considered to present a negligible exposure risk under normal conditions of processing and handling, unless they are liberated during processing (fumes from melting, dusts).
Results of PBT and vPvB assessment
No data available.
