AQUASURE Urethane Repair Adhesive & Sealant

Hazard statements (CLP)

H226, H315, H319, H334, H335, H373

Code

Statements

H226

Flammable liquid and vapour

SECTION 2: Hazards identification

Regulation (EC) No. 1272/2008 Classification of the substance or mixture

Hazard pictograms

GHS02 GHS07 GHS08

Signal word

Danger Hazardous component(s) to be indicated on label: xylene diphenylmethane-4,4'-di-isocyanante

Hazard statements

H226 Flammable liquid and vapour. H315 Causes skin irritation. H319 Causes serious eye irritation. H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled. H335 May cause respiratory irritation. H373 May cause damage to organs through prolonged or repeated exposure EUH204 Contains isocyanates. May produce an allergic reaction.

Precautionary statements

P101 If medical advice is needed, have product container or label at hand. P102 Keep out of reach of children. P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P271 Use only outdoors or in a well-ventilated area. P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing. P342+P311 If experiencing respiratory symptoms: Call a POISON CENTER/doctor. P370+P378 In case of fire: Use water spray, extinguishing powder, foam or CO2 for extinction.

Supplemental label elements

Persons already sensitised to diisocyanates may develop allergic reactions when using this product. Persons suffering from asthma, eczema or skin problems should avoid contact, including dermal contact, with this product. This product should not be used under conditions of poor ventilation unless a protective mask with an appropriate gas filter (i.e. type A1 according to standard EN 14387) is used.

2.3 Other hazards

No data available.

2.1 Classification of the substance or mixture

Classification in accordance with Regulation (EC) No 1272/2008 (CLP) Eye Irrit. 2; H319 Flam. Liq. 3; H226 Resp. Sens. 1; H334 Skin Irrit. 2; H315 STOT RE 2; H373 STOT SE 3; H335 Classification information This product is assessed and classified using the methods and criteria below referred to in Article 9 of Regulation (EC) n° 1272/2008: Physical hazards: determined through assessment data based on the methods or standards referred to in part 2 of Annex I to CLP Health hazards and environmental hazards: determined through toxicological and ecotoxicological assessment data based on the methods or standards referred to in Part 3, 4 and 5 of Annex I to CLP.