Note: Ingredients listed on restricted chemical lists
EC/CAS
119-61-9
Name of the chemical
Benzophenon (2022/692)
Concentration
N/A
EC/CAS
204-337-6
Name of the chemical
Benzophenon (2022/692)
Concentration
N/A
General Information
Revision date
2013-09-20
Product name
P+ Base Coat
Chemical name
Polyurethane Acrylate Prepolymer Resin Blend
Icons in SDS
Company Information
company name
McConnell Labs, Inc
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H225, H316, H319, H336
Hazard statements
Code
Statements
H225
Highly Flammable liquid and vapour
Section 2
SECTION 2: Hazards identification
This product is classified as a HAZARDOUS SUBSTANCE and as DANGEROUS GOODS according to the classification criteria of NOHSC: 1008 (2004) and ADG Code (Australia). WARNING! HIGHLY FLAMMABLE LIQUID AND VAPOR. CAUSES MILD SKIN IRRITATION. CAUSES SERIOUS EYE IRRITATION. MAY CAUSE DROWSINESS OR DIZZINESS.
Hazard statements
H225 – Highly flammable liquid and vapor. H316 – Causes mild skin irritation. H319 – Causes serious eye irritation. H336 - May cause drowsiness or dizziness.
Precautionary statements
P210 – Keep away from heat/sparks/open flame/hot surfaces – No Smoking. P233 – Keep container tightly closed. P243 – Take precautionary measures against static discharge. P261 – Avoid breathing dust/fume/gas/mist/vapours/spray. P264 – Wash exposed skin areas thoroughly with soap and water after handling. P272 – Contaminated work clothing should not be allowed out of the workplace. P280 – Wear protective gloves/eye protection/face protection. P280 – Wear protective gloves/protective clothing/eye protection/face protection. P302+P352 – IF ON SKIN - Wash with soap and water. P305+P351+P338 – IF IN EYES - Rinse continuously with water for several minutes. Remove contact lenses if present and easy to do – continue rinsing. P333+P313 – If skin irritation or a rash occurs - Get medical advice/attention. P321 – For specific first aid treatment (see section 4 of this Safety Data Sheet). P363 – Wash contaminated clothing before reuse. P370+P378 - In case of fire, CO2, Halon (if permitted), dry chemical, or foam for extinction. P403+P235 – Store in a well-ventilated place. Keep cool. P501 – Dispose of contents/container to a licensed treatment, storage or disposal facility (TSDF). Effects of Exposure: Ingestion: If product is swallowed, may cause nausea, vomiting and/or diarrhea and central nervous system depression. Eyes: The liquid may produce eye discomfort and is capable of causing temporary impairment of vision and/or transient eye inflammation, ulceration. The vapor is discomforting to the eye. Splashes may cause severe eye irritation, possible corneal burns and eye damage. Moderately irritating to the eyes. Skin: May be irritating to skin, especially after prolonged contact. The product can cause allergic skin reactions (e.g., rashes, welts, dermatitis) upon prolonged or repeated exposure. inhalation: Vapors of this product may be moderately irritating to the nose, throat and other tissues of the respiratory system. Symptoms of overexposure can include coughing, wheezing, nasal congestion, and difficulty breathing. Inhalation of concentrated vapors can cause central nervous system depression (e.g., drowsiness, dizziness, headaches, nausea). Odor may give some warning of exposure, but odor fatigue may occur. Symptoms of Overexposure: Ingestion: Nausea, intestinal discomfort, vomiting and/or diarrhea and central nervous system depression. Eyes: Symptoms of overexposure may include redness, itching, irritation and watering. Skin: Symptoms of skin overexposure may include redness, itching, and irritation of affected areas. 2.4
Potential Acute Health Effects
Moderate irritation to eyes and skin near affected areas. Additionally, high concentrations of vapors can cause drowsiness, dizziness, headaches and nausea. 2.5
Potential chronic health
The material may aggravate any pre-existing dermatitis condition. 2.6 Target Organs: Eyes, skin & respiratory system. NA = Not Available; ND = Not Determined; NE = Not Established; NF = Not Found; C = Ceiling Limit; See Section 16 for Additional Definitions of Terms Used NOTE: All WHMIS required information is included. It is located in appropriate sections based on the ANSI Z400.1-2010 format.