Note: Ingredients listed on restricted chemical lists
EC/CAS
65997-06-0
Name of the chemical
rosin, hydrogenated
Concentration
N/A
EC/CAS
7440-22-4
Name of the chemical
Silver
Concentration
N/A
EC/CAS
7440-50-8
Name of the chemical
Copper
Concentration
N/A
EC/CAS
231-131-3
Name of the chemical
Colloidal silver (nano) [INCI] (11)
Concentration
N/A
EC/CAS
231-159-6
Name of the chemical
Copper (nano) [INCI] (11), Colloidal Copper (nano) [INCI] (11)
Concentration
N/A
General Information
Revision date
2018-02-21
Product name
SOLDER PASTES SIRIUS 1LF
Product Synonyms
TIN - SILVER - COPPER
1.2.1 Relevant identified uses
SU 3 Industrial uses : uses of substances as such or in preparations at industrial sites PC 38 Welding and soldering products (with flux coatings or flux cores), flux products
Emergency telephone
+33 (0)1 45 42 59 59
Icons in SDS
Company Information
company name
MBO
e-mail address of the competent person responsible for the Safety Data Sheet
admin@mbosolder.com
Section 2
2.1 Classification of the substance or mixture
In compliance with EC regulation No. 1272/2008 and its amendments. This mixture does not present a physical hazard. Refer to the recommendations regarding the other products present on the site. This mixture does not present a health hazard with the exception of possible occupational exposure thresholds (see paragraphs 3 and 8). This mixture does not present an environmental hazard. No known or foreseeable environmental damage under standard conditions of use.
2.2 Label elements
In compliance with EC regulation No. 1272/2008 and its amendments. No labelling requirements for this mixture.
2.3 Other hazards
The mixture does not contain substances classified as ‘Substances of Very High Concern' (SVHC) >= 0.1% published by the European CHemicals Agency (ECHA) under article 57 of REACH: http://echa.europa.eu/fr/candidate-list-table The mixture fulfils neither the PBT nor the vPvB criteria for mixtures in accordance with annexe XIII of the REACH regulations EC 1907/2006. It is recommended to wear safety glasses, protective gloves, to wash hands after use and to work with a good ventilation of area, and suitable fumes extraction system locally installed. Its use during soldering may produce or release fumes which can be sensitizing for the respiratory system to asthmatics.
