Note: Ingredients listed on restricted chemical lists
General Information
Revision date
2015-06-19
Product name
RESIN SOLDER FLUXES
1.2.1 Relevant identified uses
SU 3 Industrial uses : uses of substances as such or in preparations at industrial sites PC 38 Welding and soldering products (with flux coatings or flux cores), flux products
Emergency telephone
+33 (0)1 45 42 59 59
Icons in SDS
Company Information
company name
MBO
e-mail address of the competent person responsible for the Safety Data Sheet
admin@mbosolder.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H225, H319, H336
Hazard statements
Code
Statements
H225
Highly Flammable liquid and vapour
Section 2
2.1 Classification of the substance or mixture
In compliance with EC regulation No. 1272/2008 and its amendments. Flammable liquid, Category 2 (Flam. Liq. 2, H225). Eye irritation, Category 2 (Eye Irrit. 2, H319). Specific target organ toxicity (single exposure), Category 3 (STOT SE 3, H336). This mixture does not present an environmental hazard. No known or foreseeable environmental damage under standard conditions of use.
2.2 Label elements
In compliance with EC regulation No. 1272/2008 and its amendments.
Hazard pictograms
GHS07 GHS02
Signal word
DANGER
Product definition
EC 200-661-7 PROPAN-2-OL
Hazard statements
H225 Highly flammable liquid and vapour. H319 Causes serious eye irritation. H336 May cause drowsiness or dizziness.
Prevention
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P280 Wear protective gloves/protective clothing/eye protection/face protection.
Response
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Storage
P403 + P233 Store in a well-ventilated place. Keep container tightly closed.
2.3 Other hazards
The mixture does not contain substances classified as ‘Substances of Very High Concern' (SVHC) >= 0.1% published by the European CHemicals Agency (ECHA) under article 57 of REACH: http://echa.europa.eu/fr/candidate-list-table The mixture satisfies neither the PBT nor the vPvB criteria for mixtures in accordance with annexe XIII of the REACH regulations EC 1907/2006. Fumes during soldering. It is recommended to wear safety glasses, protective gloves, to wash hands after use and to work with a good ventilation of area, and suitable fumes extraction system locally installed.
