MaxCeram 20

Hazard statements (CLP)

H302, H315, H317, H319, H411

Code

Statements

H302

Harmful if swallowed

Classification under CHIP

Xi R36/38; Sens. R43; N R51/53

CLP CLASSIFICATION

Acute Tox. 4 H302; Aquatic Chronic 2 H411; Eye Irrit. 2 H319; Skin Irrit. 2 H315; Skin Sens. 1 H317; - EUH205

Most important adverse effects

Irritating to eyes and skin. May cause sensitisation by skin contact. Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.

Hazard statements

EUH205 Contains epoxy constituents. May produce an allergic reaction H302: Harmful if swallowed. H315: Causes skin irritation. H317: May cause an allergic skin reaction. H319: Causes serious eye irritation. H411: Toxic to aquatic life with long lasting effects. R36/38 Irritating to eyes and skin R43: May cause sensitisation by skin contact. R51/53: Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.

Signal word

Warning

Hazard pictograms

GHS07 Exclamation mark GHS09: Environmental MaxCeram 200 CERAMIC REPAIR FLUID BASE Page: 2 Irritant Dangerous for the environment.

Precautionary statements

P264 Wash skin thoroughly after handling P273: Avoid release to the environment. P280: Wear protective gloves/protective clothing/eye protection/face protection. P301+310 IF SWALLOWED Immediately call a POISON CENTER/doctor/ P302+352 IF ON SKIN Wash with plenty of water/ P305+351+338 IF IN EYES Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P321: Specific treatment (see information on this label). P501: Dispose of contents/container to hazardous or special waste collection point. Label elements under CHIP: S2 Keep out of the reach of children S24: Avoid contact with skin. S29: Do not empty into drains. S37: Wear suitable gloves. S61: Avoid release to the environment. Refer to special instructions / safety data sheets.

PBT Substances

This product is not identified as a PBT/vPvB substance