Note: Ingredients listed on restricted chemical lists
EC/CAS
7440-50-8
Name of the chemical
Copper
Concentration
1.8-2.2
EC/CAS
7440-02-0
Name of the chemical
Nickel
Concentration
0.7-1.1
General Information
Version
01
Revision date
2024-06-13
Product name
AyontEX 4632
Product Synonyms
AMC4632, AMC4632E, AMC4631, AMC4630, 4630, 4631, 4632E, 4632
Emergency telephone
+1.216.383.4019
Icons in SDS
Company Information
company name
Materion UK Limited
e-mail address of the competent person responsible for the Safety Data Sheet
Materion-PS@materion.com
GHS Information
Signal word
Danger
Hazard Codes
Hazard statements (CLP)
H317, H372
Hazard statements
Code
Statements
H317
May cause an allergic skin reaction
Section 2
SECTION 2: Hazards identification
Emergency overview The material as sold in solid form is generally not considered hazardous. However, if the process involves grinding, melting, cutting or any other process that causes a release of dust or fumes, hazardous levels of airborne particulate could be generated. Causes damage to organs through prolonged or repeated exposure. Suspected of causing cancer. May cause an allergic skin reaction. Prolonged exposure may cause chronic effects. Dangerous for the environment if discharged into watercourses. The material as sold in solid form is generally not considered hazardous. However, if the process involves grinding, melting, cutting or any other process that causes a release of dust or fumes, hazardous levels of airborne particulate could be generated. GHS hazard categories
Physical hazards
Not classified
Health hazards
Sensitization, skin Category 1 Carcinogenicity Category 2 Specific target organ toxicity, repeated Category 1 (respiratory system) exposure Prolonged inhalation may be harmful. May cause an allergic skin reaction. Expected to be a low ingestion hazard
Environmental hazards
Hazardous to the aquatic environment, Category 1 Very toxic to aquatic life with long lasting effects. The product is not expected to be hazardous to the environment.
Signal word
Danger
Hazard statements
The material as sold in solid form is generally not considered hazardous. However, if the process involves grinding, melting, cutting or any other process that causes a release of dust or fumes, hazardous levels of airborne particulate could be generated. H372 Causes damage to organs (respiratory system) through prolonged or repeated exposure by inhalation.
Prevention
P201 Obtain special instructions before use. P202 Do not handle until all safety precautions have been read and understood. P260 Do not breathe dust/fume/gas/mist/vapors/spray. P264 Wash thoroughly after handling. P270 Do not eat, drink or smoke when using this product. P272 Contaminated work clothing should not be allowed out of the workplace. P273 Avoid release to the environment. P280 Wear protective gloves/protective clothing/eye protection/face protection.
Response
P302 + P352 IF ON SKIN: Wash with plenty of soap and water. P308 + P313 IF exposed or concerned: Get medical advice/attention. P333 + P313 If skin irritation or rash occurs: Get medical advice/attention. P362 + P364 Take off contaminated clothing and wash it before reuse. P391 Collect spillage. Safety storage P405 Store locked up.
Disposal
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.
Other physicochemical hazards
No unusual fire or explosion hazards noted.
Additional information
For further information, please contact the Product Stewardship Department at +1.216.383.4019.
2.1 Classification of the substance or mixture
Not classified. Health hazards Sensitization, skin Category 1 Carcinogenicity Category 2 Specific target organ toxicity, repeated Category 1 (respiratory system) exposure Environmental hazards Hazardous to the aquatic environment, Category 1 long-term hazard