M-25 and M-65 Alloys

Hazard statements (CLP)

H302, H317, H332, H334, H350i, H361, H372

Code

Statements

H302

Harmful if swallowed

SECTION 2: Hazards identification

A. Hazard category/Classification

Physical hazards

Not classified.

Health hazards

Acute toxicity, oral Category 4 Acute toxicity, inhalation Category 4 Sensitization, respiratory Category 1 Sensitization, skin Category 1 Carcinogenicity Category 1B Reproductive toxicity Category 2 Specific target organ toxicity, repeated Category 1 (Respiratory system) exposure

Environmental hazards

Not classified. B. Warning label items including precautionary statement

Signal word

Danger

Hazard statements

H302 Harmful if swallowed. H317 May cause an allergic skin reaction. H332 Harmful if inhaled. H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled. H350i May cause cancer by inhalation. H361 Suspected of damaging fertility or the unborn child by inhalation. H372 Causes damage to organs (respiratory system) through prolonged or repeated exposure by inhalation.

Prevention

P201 Obtain special instructions before use. P202 Do not handle until all safety precautions have been read and understood. P264 Wash thoroughly after handling. P270 Do not eat, drink or smoke when using this product. P272 Contaminated work clothing should not be allowed out of the workplace. P280 Wear protective gloves/protective clothing/eye protection/face protection. P285 In case of inadequate ventilation wear respiratory protection.

Response

P302 + P350 If on skin: Wash with plenty of water. P308 + P311 If exposed or concerned: Call a poison center/doctor. P333 + P313 If skin irritation or rash occurs: Get medical advice/attention. P342 + P311 If experiencing respiratory symptoms: Call a poison center/doctor.

Storage

P405 Store locked up.

Disposal

P501 Dispose of contents/container in accordance with local/regional/national/international regulations. C. Other hazards not included in None known. the hazard category criteria (e.g. dust explosion hazard)

Additional information

Exposure to the elements listed in Section 3 by inhalation, ingestion, and skin contact can occur when melting, casting, dross handling, pickling, chemical cleaning, heat treating, abrasive cutting, welding, grinding, sanding, polishing, milling, crushing, or otherwise heating or abrading the surface of this material in a manner which generates particulate. For further information, please contact the Product Stewardship Department at +1.216.383.4019.