Beryllium Hydride

Physical hazards

Substances and mixtures which, in contact Category 2 with water, emit flammable gases

Health hazards

Acute toxicity, oral Category 3 Acute toxicity, inhalation Category 2 Sensitization, skin Category 1 Carcinogenicity Category 1 Specific target organ toxicity, single exposure Category 3 respiratory tract irritation Specific target organ toxicity, repeated Category 1 (Respiratory system) exposure

Environmental hazards

Not classified. OSHA defined hazards Not classified.

Signal word

Danger

Hazard statements

In contact with water releases flammable gas. Toxic if swallowed. Fatal if inhaled. May cause an allergic skin reaction. May cause cancer. May cause respiratory irritation. Causes damage to organs (respiratory system) through prolonged or repeated exposure by inhalation.

Prevention

Obtain special instructions before use. Do not handle until all safety precautions have been read and understood. Minimize dust generation and accumulation. Avoid breathing dust. Wash thoroughly after handling. Do not eat, drink or smoke when using this product. Contaminated work clothing must not be allowed out of the workplace. Wear protective gloves/protective clothing/eye protection/face protection. In case of inadequate ventilation wear respiratory protection.

Response

If swallowed Immediately call a poison center/doctor. If on skin Wash with plenty of water. If inhaled Remove person to fresh air and keep comfortable for breathing. If in eyes Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If exposed or concerned: Get medical advice/attention. If skin irritation or rash occurs: Get medical advice/attention. Wash contaminated clothing before reuse. If experiencing respiratory symptoms: Call a poison center/doctor.

Storage

Store locked up. Store in a well-ventilated place. Keep container tightly closed.

Disposal

Dispose of contents/container in accordance with local/regional/national/international regulations. Hazard(s) not otherwise None known.

Additional information

Exposure to the elements listed in Section 3 by inhalation, ingestion, and skin contact can occur when melting, casting, dross handling, pickling, chemical cleaning, heat treating, abrasive cutting, welding, grinding, sanding, polishing, milling, crushing, or otherwise heating or abrading the surface of this material in a manner which generates particulate. For further information, please contact the Product Stewardship Department at +1.800.862.4118.