General Information
Revision date
2018-03-06
Product name
FFF Onyx Filament
1.2.1 Relevant identified uses
MarkForged 3D printing material
Icons in SDS
Company Information
company name
MarkForged, Inc
e-mail address of the competent person responsible for the Safety Data Sheet
support@markforged.com
Section 2
Classification (GHS-US)
Not classified
2.2 Label elements
GHS-US/CA Labeling No labeling applicable
2.3 Other hazards
Exposure may agravate pre-existing eye, skin, or respiratory conditions. There is the risk of thermal burns on contact with hot or molten material. Irritating fumes may be given off during processing or normal conditions of use, ensure adequate ventilation. The carbon fibers in the filament are not expected to be released under normal conditions of use. If the product is altered outside of its intended use, and dust is formed, proper precautions should be taken to ensure material is not respired. Product contains ingredients that are combustible dusts. Under normal conditions of use, this product is not expected to generate dust, however, if dust is generated take appropriate precautions for a combustible dust hazard - do not generate dust during clean-up, use non-sparking tools, vacuum cleanup is preferred however utilize dust suppressants if necessary, do not allow dust to accumulate in the workplace, utilize proper ventilation systems with explosion relief valves. This product and any fibers or dust are electrically conductive and may interfere with electrical systems and processes, use proper precautions.
Ingredient(s) with unknown acute toxicity
No data available
