Note: Ingredients listed on restricted chemical lists
General Information
Revision date
2018-10-10
Product name
CFF Kevlar Filament
Product Synonyms
Kevlar
CAS No.
105-60-2
1.2.1 Relevant identified uses
MarkForged 3D printing material 1.2.2
Icons in SDS
Company Information
company name
MarkForged, Inc
e-mail address of the competent person responsible for the Safety Data Sheet
support@markforged.com
Section 2
CLP CLASSIFICATION
Not classified
Adverse physicochemical, human health and environmental effects
No additional information available
2.2 Label elements
Labelling according to Regulation (EC) No. 1272/2008 [CLP]
Supplemental label elements
EUH210 - Safety data sheet available on request
Other hazards which do not result in classification
Exposure may agravate pre-existing eye, skin, or respiratory conditions. There is the risk of thermal burns on contact with hot or molten material. Irritating fumes may be given off during processing or normal conditions of use, ensure adequate ventilation. Fibers are not expected to be released under normal conditions of use. If the product is altered outside of its intended use, and dust is formed, proper precautions should be taken to ensure material is not respired. Product contains ingredients that are combustible dusts. Under normal conditions of use, this product is not expected to generate dust, however, if dust is generated take appropriate precautions for a combustible dust hazard - do not generate dust during clean-up, use non-sparking tools, vacuum cleanup is preferred however utilize dust suppressants if necessary, do not allow dust to accumulate in the workplace, utilize proper ventilation systems with explosion relief valves.
