Note: Ingredients listed on restricted chemical lists
General Information
Revision date
2018-08-27
Product name
CFF HSHT Fiberglass Filament
Product Synonyms
HSHT Fiberglass
1.2.1 Relevant identified uses
MarkForged 3D printing material 1.2.2
Icons in SDS
Company Information
company name
MarkForged, Inc
e-mail address of the competent person responsible for the Safety Data Sheet
support@markforged.com
Section 2
CLP CLASSIFICATION
Not classified
Adverse physicochemical, human health and environmental effects
No additional information available
2.2 Label elements
According to Regulation (EC) No. 1272/2008 [CLP]
Supplemental label elements
EUH210 - Safety data sheet available on request.
Other hazards which do not result in classification
Glass Oxide is known by IARC as possibly carcinogenic to humans (2B) via inhlation of respirable dust/fibers. Continuous Filament Fiber Glass is classified as an IARC group 3, not classifiable as a human carcinogen. Under normal conditions of use, this product is not expected to produce respirable fiberglass/glass oxide fibers, and is therefore not classified as a carcinogen. If product is altered and dust is formed, proper precautions should be taken to ensure material is not respirated. There is the risk of thermal burns on contact with hot or molten material. Irritating fumes may be given off during processing or normal conditions of use, ensure adequate ventillation. Exposure may agravate pre-existing eye, skin, or respiratory conditions. Product contains ingredients that are combustible dusts. Under normal conditions of use, this product is not expected to generate dust, however, if dust is generated take appropriate precautions for a combustible dust hazard - do not generate dust during clean-up, use non-sparking tools, use adequate ventilation, utilize dust supressaants if necessary, do not allow dust to accumulate in the workplace.
