General Information
Revision date
2015-05-05
Product name
MS-122AD
1.2.1 Relevant identified uses
Release Agent or Dry Lubricant DPMS-Z0918A PTFE Release Agent/Dry Lubricant
Emergency telephone
(800) 424-9300
Icons in SDS
Company Information
company name
Mark V Lab
Section 2
Hazard pictograms
not required
Precautionary statements
Pressurized container Do not pierce or burn, even after use Avoid breathing spray. Wash skin thoroughly after handling. Use in a well-ventilated area. In case of EYE contact, immediately flush eyes with plenty of water. If eye irritation persists: Get medical attention. IF ON SKIN: Remove/Take off all contaminated clothing, immediately. Rinse skin with water. If INHALED: Remove victim to fresh air. Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F Hazardous prevention measures: Avoid release to the environment. Dispose of contents/container to an approved waste disposal plant. Other hazards which do not result in classification or are not covered by GHS Vapors are heavier than air and can cause suffocation by reducing oxygen available for breathing. May cause cardiac arrhythmia. The thermal decomposition vapors of fluorinated polymers may cause polymer fume fever with flu-like symptoms in humans, especially when smoking contaminated tobacco. Repeated episodes of polymer fume fever may result in persistent lung effects. MS-122AD 3. INGREDIENTS Material (s) CAS No. Approximate % 1,1,1,2-Tetrafluoroethane 811-97-2 88 - 92 Isopropyl Alcohol 67-63-0 5 - 10 Poly-TFE, Omega-Hydro-Alpha-(Methylcyclohexyl)- 65530-85-0 1 - 2 Poly-Tetrafluoroethylene 9002-84-0 < 1
