Marathon Petroleum No. 2 Ultra Low Sulfur Diesel

MARATHON CANADA MARKETING, Ltd

Revision date : 2018-01-10

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.
GHS02 GHS07 GHS08 GHS09
Health risk rating 1
Safety risk rating 1
Environmental risk rating 1

Note: Ingredients listed on restricted chemical lists

EC/CAS

68476-34-6

Name of the chemical

Fuels, diesel, no. 2

Concentration

50-100

EC/CAS

8008-20-6

Name of the chemical

Kerosine (petroleum)

Concentration

0-50

Listed in

EC/CAS

91-20-3

Name of the chemical

Naphthalene,3

Concentration

0.3-2.6

General Information

Revision date

2018-01-10

Product name

Marathon Petroleum No. 2 Ultra Low Sulfur Diesel

Product Synonyms

2 Diesel; No. 2 Ultra Low Sulfur Diesel 15 ppm Sulfur Max; Ultra Low Sulfur Diesel No. 2

Chemical name

Complex Hydrocarbon Substance

1.2.1 Relevant identified uses

Fuel

Emergency telephone

1-877-627-5463

Icons in SDS

GHS02 GHS07 GHS08 GHS09

Company Information

company name

MARATHON CANADA MARKETING, Ltd

Section 2

SECTION 2: Hazards identification

This chemical is considered hazardous by the 2012 OSHA Hazard Communication Standard (29 CFR 1910.1200) Classification

Precautionary statements

Disposal Dispose of contents/container at an approved waste disposal plant

2.1 Classification of the substance or mixture

OSHA Regulatory Status This chemical is considered hazardous by the 2012 OSHA Hazard Communication Standard (29 CFR 1910.1200) Flammable liquids Category 3 Acute toxicity - Inhalation (Dusts/Mists) Category 4 Skin corrosion/irritation Category 2 Carcinogenicity Category 2 Specific target organ toxicity (single exposure) Category 3 Specific target organ toxicity (repeated exposure) Category 2 Aspiration toxicity Category 1 Acute aquatic toxicity Category 2 Chronic aquatic toxicity Category 2 Hazards Not Otherwise Classified (HNOC) Static accumulating flammable liquid Label elements EMERGENCY OVERVIEW Danger FLAMMABLE LIQUID AND VAPOR May accumulate electrostatic charge and ignite or explode May be fatal if swallowed and enters airways Harmful if inhaled Causes skin irritation May cause respiratory irritation May cause drowsiness or dizziness Suspected of causing cancer May cause damage to organs (thymus, liver, bone marrow) through prolonged or repeated exposure Toxic to aquatic life with long lasting effects Appearance Yellow to Red Liquid Physical State Liquid Odor Hydrocarbon Precautionary Statements - Prevention Obtain special instructions before use Do not handle until all safety precautions have been read and understood Keep away from heat/sparks/open flames/hot surfaces. - No smoking Keep container tightly closed Ground/bond container and receiving equipment Use only non-sparking tools. Use explosion-proof electrical/ventilating/lighting/equipment Take precautionary measures against static discharge Do not breathe mist/vapors/spray Use only outdoors or in a well-ventilated area Wear protective gloves/protective clothing/eye protection/face protection Wash hands and any possibly exposed skin thoroughly after handling Avoid release to the environment Precautionary Statements - Response IF exposed or concerned: Get medical attention IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower If skin irritation occurs: Get medical attention Wash contaminated clothing before reuse IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing Call a POISON CENTER or doctor if you feel unwell IF SWALLOWED: Immediately call a POISON CENTER or doctor Do NOT induce vomiting In case of fire: Use water spray, fog or regular foam for extinction Collect spillage Precautionary Statements - Storage Store in a well-ventilated place. Keep container tightly closed Keep cool Store locked up Precautionary Statements - Disposal Dispose of contents/container at an approved waste disposal plant 3. COMPOSITION/INFORMATION ON INGREDIENTS No. 2 Ultra Low Sulfur Diesel is a complex mixture of paraffins, cycloparaffins, olefins and aromatic hydrocarbon chain lengths predominantly in the range of eleven to twenty carbons. May contain up to 5% Renewable Diesel. May contain small amounts of dye and other additives (<0.15%) which are not considered hazardous at the concentration(s) used. May contain a trace amount of benzene (<0.01%). Contains a trace amount of sulfur (<0.0015%) Composition Information: Name CAS Number % Concentration No. 2 Diesel Fuel 68476-34-6 50-100 Kerosine (petroleum) 8008-20-6 0-50 Alkanes, C10-C20 branched and linear 928771-01-1 0-5 Naphthalene 91-20-3 0.3-2.6 All concentrations are percent by weight unless material is a gas. Gas concentrations are in percent by volume. 4. FIRST AID MEASURES First Aid Measures General Advice: In case of accident or if you feel unwell, seek medical advice immediately (show directions for use or safety data sheet if possible). Inhalation: Remove to fresh air. If not breathing, institute rescue breathing. If breathing is difficult, ensure airway is clear, give oxygen and continue to monitor. If heart has stopped, immediately begin cardiopulmonary resuscitation (CPR). Keep affected person warm and at rest. GET IMMEDIATE MEDICAL ATTENTION. Skin Contact: Immediately wash exposed skin with plenty of soap and water while removing contaminated clothing and shoes. May be absorbed through the skin in harmful amounts. Get medical attention if irritation persists. Any injection injury from high pressure equipment should be evaluated immediately by a physician as potentially serious (See NOTES TO PHYSICIAN). Place contaminated clothing in closed container until cleaned or discarded. If clothing is to be laundered, inform the person performing the operation of contaminant's hazardous properties. Destroy contaminated, non-chemical resistant footwear. Eye Contact: Flush immediately with large amounts of water for at least 15 minutes. Eyelids should be held away from the eyeball to ensure thorough rinsing. Gently remove contacts while flushing. Get medical attention if irritation persists. Ingestion: Do not induce vomiting because of danger of aspirating liquid into lungs, causing serious damage and chemical pneumonitis. If spontaneous vomiting occurs, keep head below hips, or if patient is lying down, turn body and head to side to prevent aspiration and monitor for breathing difficulty. Never give anything by mouth to an unconscious person. Keep affected person warm and at rest. GET IMMEDIATE MEDICAL ATTENTION. Most important signs and symptoms, both short-term and delayed with overexposure Adverse Effects: Irritating to the skin and mucous membranes. Symptoms may include redness, itching, and inflammation. May cause nausea, vomiting, diarrhea, and signs of nervous system depression: headache, drowsiness, dizziness, loss of coordination, disorientation and fatigue. Aspiration hazard. May cause coughing, chest pains, shortness of breath, pulmonary edema and/or chemical pneumonitis. Repeated or prolonged skin contact may cause drying, reddening, itching and cracking. Prolonged or repeated exposure may cause adverse effects to the thymus, liver, and bone marrow. Indication of any immediate medical attention and special treatment needed Notes To Physician: INHALATION: This material (or a component) sensitizes the myocardium to the effects of sympathomimetic amines. Epinephrine and other sympathomimetic drugs may initiate cardiac arrhythmias in individuals exposed to this material. Administration of sympathomimetic drugs should be avoided. SKIN: Leaks or accidents involving high-pressure equipment may inject a stream of material through the skin and initially produce an injury that may not appear serious. Only a small puncture wound may appear on the skin surface but, without proper treatment and depending on the nature, original pressure, volume, and location of the injected material, can compromise blood supply to an affected body part. Prompt surgical debridement of the wound may be necessary to prevent irreversible loss of function and/or the affected body part. High pressure injection injuries may be SERIOUS SURGICAL EMERGENCIES. INGESTION: This material represents a significant aspiration and chemical pneumonitis hazard. Induction of emesis is not recommended. 5. FIRE-FIGHTING MEASURES Suitable extinguishing media For small fires, Class B fire extinguishing media such as CO2, dry chemical, foam (AFFF/ATC) or water spray can be used. For large fires, water spray, fog or foam (AFFF/ATC) can be used. Firefighting should be attempted only by those who are adequately trained and equipped with proper protective equipment. Unsuitable extinguishing media Do not use straight water streams to avoid spreading fire. Specific hazards arising from the chemical This product has been determined to be a flammable liquid per the OSHA Hazard Communication Standard and should be handled accordingly. May accumulate electrostatic charge and ignite or explode. Vapors may travel along the ground or be moved by ventilation and ignited by many sources such as pilot lights, sparks, electric motors, static discharge, or other ignition sources at locations distant from material handling. Flashback can occur along vapor trail. For additional fire related information, see NFPA 30 or the Emergency Response Guidebook 128. Hazardous combustion products Smoke, carbon monoxide, and other products of incomplete combustion. Explosion data Sensitivity to Mechanical Impact No. Sensitivity to Static Discharge Yes. Special protective equipment and precautions for firefighters Firefighters should wear full protective clothing and positive-pressure self-contained breathing apparatus (SCBA) with a full face-piece, as appropriate. Avoid using straight water streams. Water spray and foam (AFFF/ATC) must be applied carefully to avoid frothing and from as far a distance as possible. Avoid excessive water spray application. Keep surrounding area cool with water spray from a distance and prevent further ignition of combustible material. Keep run-off water out of sewers and water sources. Additional firefighting tactics FIRES INVOLVING TANKS OR CAR/TRAILER LOADS: Fight fire from maximum distance or use unmanned hose holders or monitor nozzles. Cool containers with flooding quantities of water until well after the fire is out. Do not direct water at source of leak or safety devices; icing may occur. Withdraw immediately in case of rising sound from venting safety devices or discoloration of tank. ALWAYS stay away from tanks engulfed in fire. For massive fire, use unmanned hose holders or monitor nozzles: if this is impossible, withdraw from area and let fire burn. EVACUATION: Consider initial downwind evacuation for at least 1000 feet. If tank, rail car or tank truck is involved in a fire, ISOLATE for 5280 feet (1 mile) in all directions; also, consider initial evacuation of 5280 feet (1 mile) in all directions. NFPA Health 1 Flammability 2 Instability 0 Special Hazard - 6. ACCIDENTAL RELEASE MEASURES Personal precautions: Keep public away. Isolate and evacuate area. Shut off source if safe to do so. Eliminate all ignition sources. All contaminated surfaces will be slippery. Protective equipment: Use personal protection measures as recommended in Section 8. Emergency procedures: Advise authorities and National Response Center (800-424-8802) if the product has entered a water course or sewer. Notify local health and pollution control agencies, if appropriate. Environmental precautions: Avoid release to the environment. Avoid subsoil penetration. Methods and materials for Contain liquid with sand or soil. Prevent spilled material from entering storm drains, sewers, containment: and open waterways. Methods and materials for cleaning Use suitable absorbent materials such as vermiculite, sand, or clay to clean up residual up: liquids. Recover and return free product to proper containers. When recovering free liquids ensure all equipment is grounded and bonded. Use only non-sparking tools. 7. HANDLING AND STORAGE Safe Handling Precautions: NEVER SIPHON THIS PRODUCT BY MOUTH. Use appropriate grounding and bonding

SDS Library

Move your SDS library online today

Check Icon
Setup – Easy setup with our database of 16 million+ SDSs
Check Icon
Up-to-date – Your SDS get updated to latest versions.
Check Icon
Employee access – Tablets, Smartphones, or link from Corporate Intranet
Check Icon
Safety – One-click access to first aid information.
Check Icon
Labels – Generate Secondary Container Labels with just one click.