Note: Ingredients listed on restricted chemical lists
EC/CAS
220-120-9/2634-33-5
Name of the chemical
1,2-Benzisothiazol-3(2H)-one
Concentration
≥0.005-
EC/CAS
611-341-5/55965-84-9
Name of the chemical
Mixture of 5-chloro-2-methyl-2H- isothiazol-3-one (EINECS 247-500-7) and 2-methyl-2H-isothiazol-3-one (EINECS 220-239-6)
Concentration
<0.0015%
EC/CAS
238-878-4/14808-60-7
Name of the chemical
Silica, crystalline
Concentration
≥5-<10%
EC/CAS
220-239-6/2682-20-4
Name of the chemical
2-Methyl-2H-isothiazol-3-one
Concentration
<0.0015%
EC/CAS
247-500-7
Name of the chemical
Mixture of 5-Chloro-2-methyl-isothiazol-3(2H)-one and 2-methylisothiazol-3(2H)-one
Concentration
<0.0015%
General Information
Revision date
2020-02-06
Product name
SILANCOLOR BASE COAT
1.2.1 Relevant identified uses
Colored undercoat
1.2.2. Uses advised against
Data not available
Icons in SDS
Company Information
company name
MAPEI U.K. Ltd
e-mail address of the competent person responsible for the Safety Data Sheet
sicurezza@mapei.it
Section 2
2.1 Classification of the substance or mixture
Regulation (EC) n. 1272/2008 (CLP) 0 The product is not classified as hazardous according to Regulation EC 1272/2008 (CLP).
Adverse physicochemical, human health and environmental effects
No other hazards
2.2 Label elements
The product is not classified as hazardous according to Regulation EC 1272/2008 (CLP).
Special Provisions
EUH210 Safety data sheet available on request.
Contains
1,2-benzisothiazol-3(2H)-one reaction mass of: 5-chloro-2-methyl-4- isothiazolin-3-one [EC no. 247-500-7] and 2-methyl-2H -isothiazol-3-one [EC no. 220- 239-6] (3:1)
Annex XVII - Restrictions on the manufacture, placing on the market and use of certain dangerous substances, mixtures and articles
None
2.3 Other hazards
No PBT/vPvB Ingredients are present No other hazards This product contains crystalline silica (quartz sand). IARC has classified crystalline silica as a Group 1 carcinogen. Both IARC and NTP consider silica as a known human carcinogen. Evidence is based on the chronic and long-term exposure workers have had to respirable sized crystalline silica dust particles. Because this product is in liquid or paste form, it does not pose a dust hazard; therefore, this classification is not relevant. (Note: sanding of the hardened product may create a silica dust hazard)
