Note: Ingredients listed on restricted chemical lists
EC/CAS
203-961-6/112-34-5
Name of the chemical
2-(2-butoxyethoxy)ethanol
Concentration
≥2.5-<5 00-8
EC/CAS
238-878-4/14808-60-7
Name of the chemical
Silica, crystalline
Concentration
≥1-<2.5
EC/CAS
212-222-7/770-35-4
Name of the chemical
1-Phenoxypropan-2-ol (7)
Concentration
≥1-<2.5
EC/CAS
220-120-9/2634-33-5
Name of the chemical
1,2-Benzisothiazol-3(2H)-one
Concentration
≥0.025- <0.05% 00-6
EC/CAS
611-341-5/55965-84-9
Name of the chemical
Mixture of 5-chloro-2-methyl-2H- isothiazol-3-one (EINECS 247-500-7) and 2-methyl-2H-isothiazol-3-one (EINECS 220-239-6)
Concentration
<0.0015 %
EC/CAS
247-500-7
Name of the chemical
Mixture of 5-Chloro-2-methyl-isothiazol-3(2H)-one and 2-methylisothiazol-3(2H)-one
Concentration
00-5 0,06%≤C<0,6 0,06%≤C<0,6
General Information
Revision date
2022-06-14
Product name
MAPECOAT TNS LINE SEAL
Emergency telephone
91.562.04.20
Icons in SDS
Company Information
company name
MAPEI Spain S.A.
e-mail address of the competent person responsible for the Safety Data Sheet
sicurezza@mapei.it
Section 2
SECTION 2: Hazards identification
Adverse physicochemical, human health and environmental effects
No other hazards
Special Provisions
EUH208
Contains
1,2-benzisothiazol-3(2H)-one; 1,2-benzisothiazolin-3-one. May produce an allergic reaction EUH208 Contains reaction mass of: 5-chloro-2-methyl-4-isothiazolin-3-one [EC no. 247-500-7] and 2-methyl-2H - isothiazol-3-one [EC no. 220-239-6] (3:1). May produce an allergic reaction. EUH210 Safety data sheet available on request.
Annex XVII - Restrictions on the manufacture, placing on the market and use of certain dangerous substances, mixtures and articles
None.
2.3 Other hazards
No PBT, vPvB or endocrine disruptor substances present in concentration >= 0.1%. No other hazards This product contains crystalline silica (quartz sand). IARC has classified crystalline silica as a Group 1 carcinogen. Both IARC and NTP consider silica as a known human carcinogen. Evidence is based on the chronic and long-term exposure workers have had to respirable sized crystalline silica dust particles. Because this product is in liquid or paste form, it does not pose a dust hazard; therefore, this classification is not relevant. (Note: sanding of the hardened product may create a silica dust hazard)
